2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

POSSIBLE LEAK ( idle fluctuation )

Thread Tools
 
Search this Thread
 
Old Nov 15, 2002 | 11:11 PM
  #1  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
POSSIBLE LEAK ( idle fluctuation )

I TOOK OFF THE INTAKE on my 87 sport today to 1st . do the throttle body mod 2nd. to look for a vacuum leak seeing that my car's idle fluctuates and is also high in the rpm's while fluctuating. i replaced the lower intake manifold gasket eventhough i had a rebuild 4k ago . cant be too sure. i saw no hoses loose under the manifold. i sprayed starting fluid everywhere after the re assembly and i got nothing. the throttle body mod seemed to have let the idle go down a little bit. now im idle fluctuating at around 1300-1600 rpm's at idle. have i missed anywhere?anything i havent done? can anyone help me out? any suggestions will be helpful
thanks
jack
Reply
Old Nov 15, 2002 | 11:22 PM
  #2  
dr0x's Avatar
pei > caek
Tenured Member 05 Years
 
Joined: May 2002
Posts: 4,643
Likes: 0
From: Mars
Adjust your tps.
Reply
Old Nov 15, 2002 | 11:28 PM
  #3  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
i had a good tps today but for some reason the button on the tps got stuck so i had to use an old one i had sitting around and that is making the idle die down a lil and i think this tps is bad. maybe ill have someone adjust it for me and see what that does. but anyone got any other suggestions
Reply
Old Nov 15, 2002 | 11:29 PM
  #4  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
ohh yea thanks for the input drox
Reply
Old Nov 16, 2002 | 12:09 AM
  #5  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
BUMP
Reply
Old Nov 16, 2002 | 01:52 AM
  #6  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
ANYTHING ELSE SOMEone can reply with because im stuck here with one opinion and i hate this idle
thanks
jack
Reply
Old Nov 16, 2002 | 02:00 AM
  #7  
Kyrol's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 62
Likes: 0
From: Cumberland MD
Mine does that some times but after it warms up it drops back to normal.
Reply
Old Nov 16, 2002 | 04:18 PM
  #8  
apreludem's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 905
Likes: 0
From: houston
my idle is messed up aswell...mine freaken idles at 1700.....and i have to press the accelerator when i first start the vehicle or else it dies..
Reply
Old Nov 16, 2002 | 06:15 PM
  #9  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
does n e one know what might be causing this?
Reply
Old Nov 17, 2002 | 03:20 PM
  #10  
Josepi's Avatar
Despise Enmity
Tenured Member 20 Years
 
Joined: May 2001
Posts: 2,420
Likes: 0
From: Richmond, VA
First off, lets answer a few questions:

1. Did you disable the thermowax?
2. How much into the TB mod did you go?
3. This high idle, is it while warm/cold?
4. Have you adjusted/set your TPS?
5. Have you set the idle per FSM/BAC?

These will help in guiding you to a fix.

~J
Reply
Old Nov 17, 2002 | 05:52 PM
  #11  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
OK WELL :
bac isnt responding to me and i can unplug it and no change in idle.
tps was set but need to do that again and get a new one probobly
did the whole TB mod
and it fluctuates when its cold and when its hot

jack
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
alexdimen
3rd Generation Specific (1993-2002)
20
Oct 23, 2015 01:50 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM
vmerino
2nd Generation Specific (1986-1992)
0
Sep 5, 2015 11:26 AM




All times are GMT -5. The time now is 05:16 PM.