porting s5 wastegate help
02-20-06, 09:28 PM
#1
ChaoticControl
Thread Starter
Join Date: Nov 2005
Location: NC
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
porting s5 wastegate help
Quick question...do you have to remove any of the internal components of the turbo as Im afraid of the shavings getting stuck inside? Thanks guys.
02-20-06, 10:43 PM
#2
Got Rotors?
Join Date: Mar 2002
Location: cambridge, Ontario, Canada
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
go here for the instructions.
http://www.fc3spro.com/TECH/HOWTO/KWG/kwg.html
I did this and only removed what they did (what they show). You will have to clean out the housing after but that should be it. You remove the shaft and turbines as an assembly. Dont take them off the shaft or you will have to have them rebalanced.
Hope that helps.
http://www.fc3spro.com/TECH/HOWTO/KWG/kwg.html
I did this and only removed what they did (what they show). You will have to clean out the housing after but that should be it. You remove the shaft and turbines as an assembly. Dont take them off the shaft or you will have to have them rebalanced.
Hope that helps.
02-20-06, 10:53 PM
#3
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
You should remove the exhaust housing. Read this if you don't know how:
https://www.rx7club.com/attachment.p...chmentid=76207
https://www.rx7club.com/attachment.p...chmentid=76207
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM