popping noise @ 6,000rpm ??
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2002
Location: bay area
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
popping noise @ 6,000rpm ??
I FINALLY got my T2 running.. S5 into 87 t2..in addition to 820cc secondary injectors, but no type of fuel mangemant... anywho, i took her hard up to around 6,000 rpm and i started to hear popcorn popping sounds from my exhaust, from 5,500rpm and the power seemed to have topped out.(no fuel cut or anything)
i hope im just running too rich for my own good, but could that be detonation??
-TIA
i hope im just running too rich for my own good, but could that be detonation??
-TIA
#2
Rotary Enthusiast
Join Date: Oct 2002
Location: The Boro, TN
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
maybe you should check your timing? I think that your also running way rich, You should do something about your fuel. I bet it makes nice flames though!!!! Also did you use the s5 computer when you did the swap?? If not that also could be the problem
-Chris
-Chris
#7
Senior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2002
Location: bay area
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Also did you use the s5 computer when you did the swap??
Stock turbo I assume.
i'm surprised its not happening before you get to 6k
thanks guys!!
Trending Topics
#9
Full Member
Join Date: May 2002
Location: SSU currently (nor cal)
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
well i have a "pop" noise in my 91 na and it only occurs at full throttle from 1st to 2nd and 2nd to 3rd. i was told that it could be my pre cat that is clogged. no harm i guess.
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM
Linda_Lovelace
General Rotary Tech Support
0
09-18-15 10:04 PM