2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

PLEASE HELP ME! my fuel door won't open and I need gas pretty soon!

Old Apr 16, 2007 | 04:46 PM
  #1  
Matangz's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 16
Likes: 0
From: Michigan
PLEASE HELP ME! my fuel door won't open and I need gas pretty soon!

I got a 1988 FC and this is a problem. I was wondering if anybody knew how to fix it, or at least open the fuel door.

I tried pulling the latch and my wife trying to open the door, but that didn't work. I got to open it once in my garage and I thought it wasn't a big deal so I closed it back up. Now it won't open.

Is there any other way to open the fuel door. Help!
Reply
Old Apr 16, 2007 | 04:47 PM
  #2  
turn and burn's Avatar
Full Member
 
Joined: Mar 2007
Posts: 51
Likes: 0
From: RMH Alberta, Canada
screwdriver?
Reply
Old Apr 16, 2007 | 04:52 PM
  #3  
Matangz's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 16
Likes: 0
From: Michigan
haha I already tried that..I chip some the paint. I didn't want to put too much force into opening that door.
Reply
Old Apr 16, 2007 | 04:55 PM
  #4  
turn and burn's Avatar
Full Member
 
Joined: Mar 2007
Posts: 51
Likes: 0
From: RMH Alberta, Canada
Must be a cable hooked to the door lever from the lever inside of the car. Try to find it and pull on it. Thats all i can think of.
Reply
Old Apr 16, 2007 | 04:56 PM
  #5  
Suiicidalpenguin's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Mar 2007
Posts: 310
Likes: 0
From: USA/Mass
Open the hatch and peel the carpet back from the wall w/ the filler. You will see a little mechanism with a cable attached to it.... personally I just took it off cuz my door didn't have any spring to it sanymore so even pulling it it wouldn't open.
Reply
Old Apr 16, 2007 | 04:58 PM
  #6  
VeLiduS's Avatar
Rotary Newb
 
Joined: Mar 2007
Posts: 25
Likes: 0
From: IL
just a toss up idea but maybe take off the carpet paneling back on the side and scope around maybe u can figure out a backdoor... if u will

yea that guy beat me to it
Reply
Old Apr 16, 2007 | 05:01 PM
  #7  
Matangz's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 16
Likes: 0
From: Michigan
haha thanks guys, I'll try it..hopefully that works
Reply
Old Apr 16, 2007 | 05:06 PM
  #8  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
If this is a coupe there is an emergency release inside the car, at the gas door. Pull back the access panel and reach in and release the door.

Don't you guys (and girls) ever read your owners manual??? Come on... basic owners manual stuff here.
Reply
Old Apr 16, 2007 | 05:06 PM
  #9  
Matangz's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 16
Likes: 0
From: Michigan
alright..yeah it worked! I didn't know what the hell I was pulling but yeah..it worked. Thanks again! Now I can go get some gas! haha
Reply
Old Apr 16, 2007 | 05:08 PM
  #10  
Matangz's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 16
Likes: 0
From: Michigan
I never have read the owners manual. I probably should read it though, since I didn't know about the fuel door having an emergency release. Thanks guys
Reply
Old Apr 16, 2007 | 05:12 PM
  #11  
turn and burn's Avatar
Full Member
 
Joined: Mar 2007
Posts: 51
Likes: 0
From: RMH Alberta, Canada
When was the last time you checked your oil?
Reply
Old Apr 16, 2007 | 05:22 PM
  #12  
My5ABaby's Avatar
Rotaries confuse me
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 4,219
Likes: 3
From: Murfreesboro, TN
Originally Posted by Icemark
If this is a coupe there is an emergency release inside the car, at the gas door. Pull back the access panel and reach in and release the door.

Don't you guys (and girls) ever read your owners manual??? Come on... basic owners manual stuff here.
Here's a link to the 86 one: http://sdjones.org/gv_files/RX7OwnersManual86.pdf
Reply
Old Apr 16, 2007 | 05:27 PM
  #13  
Suiicidalpenguin's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Mar 2007
Posts: 310
Likes: 0
From: USA/Mass
I read the manual but for some reason when I get to things I just can't figure out what it meens or it entireally doesn't make sense on what to look for then after I ask or figure it out go wow im a moron lol
Reply
Old Apr 16, 2007 | 07:32 PM
  #14  
Matangz's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 16
Likes: 0
From: Michigan
I know about the oil, rx7 burns oil..I checked it out today just to make sure I wasn' t low.

I just bought this car about 2 weeks ago..Its my first RX7..So far I'm enjoying the car. When I test drove it, I was like..what is that noise. haha. I've never driven one before..except the rx8.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:32 PM.