Please help me install a DIS-2 on the trailing coil.
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: New Jersey
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Please help me install a DIS-2 on the trailing coil.
I need help with installing a MSD DIS-2 on the trailing coils. Would someone be kind enough to explain to me what wire hooks up to what component? Do I need to change any of the pin settings on the DIS-2 unit. I would like to have this unit setup this weekend.
#2
Lives on the Forum
Follow the instructions with the DIS-2 - just make sure which channel is which.  Also, switch it so it's 360-degree, versus 720-degree - this'll allow the multi-spark to work correctly.  Turn off all the retard and rev limiter features.  The manual is pretty thorough on this.
As for wiring on FC, insert the DIS-2 in between the ignitor and the coil itself.
-Ted
As for wiring on FC, insert the DIS-2 in between the ignitor and the coil itself.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM