Pics of the srx7 exhaust
05-09-02, 03:51 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2001
Location: MI 48111
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
Pics of the srx7 exhaust
Ok, well I finally got around to taking pics of the exhaust. Now mind you I just have it hanging on there and it still needs to be lined up...but I'm sure you'll get the idea.
Trending Topics
05-10-02, 08:57 AM
#8
~~~~~~~~~~~~~~~~~~~~~~~
Join Date: May 2001
Location: Pittsburgh, PA
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
I used the stock rubber exhaust hangers and then added a high stength zip tie to get them both to line up right. Just hang them on the stock hangers and then put one zip tie on each side. Then slowly pull on the zip tie untill you get one where you want it then go to the other side and match it up. You will need a strong zip tie, but it worked on my car for over a year with no ill effects; I have since taken that exhaust off. You can find these high stength zip ties at lowes or home depot.
05-10-02, 10:47 AM
#9
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2001
Location: MI 48111
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
I haven't been able to start the car for a while, so I can't tell you how loud it is. But my guess is pretty loud...a little less so since I have a turbo. Also, mind you that there are no other resonators in this exhaust..it goes 3" all the way to the y then 2.5" those mufflers are the only thing providing quieting. I'll let you guys know on the sound soon..but first I have to dent the floor up at that firewall to fit the monster downpipe. Later fellas.
05-10-02, 01:26 PM
#11
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
05-10-02, 08:12 PM
#15
Just Looking Around
Join Date: Jan 2002
Location: Fort Benning, Ga./ Anna, Tx.
Posts: 1,830
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cbrock
Actually the 439.00 one isn't the on I got. Mine is stainless steel. Call them and see whats up.
Actually the 439.00 one isn't the on I got. Mine is stainless steel. Call them and see whats up.
kleach
05-11-02, 01:23 PM
#18
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2001
Location: MI 48111
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
I just talked with them and they said they still make them..but not very many. I was having a problem getting the pass side tip to line up right. Take a look at the pic. The only way you can really tell it isn't right is if you look straight down on it. Here, check out the pic. Oh and I believe I paid round 600 for it.
05-12-02, 11:57 AM
#22
Rotary Enthusiast
Join Date: Dec 2001
Location: UK
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
Have you run it yet? i want to know if its very loud?
What size Tips are they? they look like 90mm they look good (well balanced).
What size Tips are they? they look like 90mm they look good (well balanced).
Last edited by Grizzly; 05-12-02 at 12:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post