pics - found OEM bodykit replicas
06-03-04, 03:45 PM
#1
knowledge junkie
Thread Starter
pics - found OEM bodykit replicas
For you NA and early TII guys, I spotted these today. Don't think this has been covered yet:
BOOSTD 7 - I don't think this conflicts with anything you guys are doing.
BOOSTD 7 - I don't think this conflicts with anything you guys are doing.
Last edited by vaughnc; 06-03-04 at 03:55 PM.
06-03-04, 03:59 PM
#7
Nice, but there not OEM replicas. The OEM (if your refering to the 89-91 Turbo II side skirts) dont have that bump midway on it and include the mouldings as part of the skirt. The OEM ones look just like a Rx without them, except there a little more Voluptuous.
~Mike...........
~Mike...........
Trending Topics
06-03-04, 04:02 PM
#8
Laying Down Rotary Law
Looks damm good
not to wild
I may have to get a set only
if only it was in cheaper FB
since I would need to paint them
hmm yet CF would make for a stronger side skirt
that would resist cracking
so yes I changed my mind CF all the way!
not to wild
I may have to get a set only
if only it was in cheaper FB
since I would need to paint them
hmm yet CF would make for a stronger side skirt
that would resist cracking
so yes I changed my mind CF all the way!
06-03-04, 04:16 PM
#9
Eat, sleep, work, mod.
Join Date: Jun 2001
Location: Long Island
Posts: 2,517
Likes: 0
Received 0 Likes
on
0 Posts
They are replicas of the original skirts they made in FG hehe The FG versions are listed as well on that site - I didn't think the S5 skirts had that bump either. Aren't S5 skirts 2 pieces as well? Nice prices on that site.
06-03-04, 05:10 PM
#11
Laying Down Rotary Law
yea I was looking at them closer now
and there not too good of a replica at all
they do not wrap around the fenders like they do with the S5 skirts..I dislike that gap these replicas have on the fenders and also those humps , plus they dont go up to/include the s5 moldings
and there not too good of a replica at all
they do not wrap around the fenders like they do with the S5 skirts..I dislike that gap these replicas have on the fenders and also those humps , plus they dont go up to/include the s5 moldings
Last edited by kabooski; 06-03-04 at 05:17 PM.
06-03-04, 07:58 PM
#12
13B N/A POWA!
Join Date: Apr 2002
Location: Everywhere, WRLD
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know if you can still get the stock side steps from the factory? If so, how much are they...are they easily acquired or are they nearly extinct?
06-03-04, 08:01 PM
#13
knowledge junkie
Thread Starter
Originally posted by KiyoKix
... can (you) still get the stock side steps from the factory? .... how much?
... can (you) still get the stock side steps from the factory? .... how much?
Originally posted by kabooski
... not too good of a replica at all .... do not wrap around the fenders ... gap on the fenders and humps , plus they dont go up to/include the s5 moldings...
... not too good of a replica at all
.... do not wrap around the fenders ... gap on the fenders and humps , plus they dont go up to/include the s5 moldings...
Last edited by vaughnc; 06-03-04 at 08:07 PM.
06-03-04, 08:21 PM
#14
Rotary Enthusiast
Join Date: Mar 2001
Location: Victoria, BC, Canada
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by KiyoKix
Does anyone know if you can still get the stock side steps from the factory? If so, how much are they...are they easily acquired or are they nearly extinct?
Does anyone know if you can still get the stock side steps from the factory? If so, how much are they...are they easily acquired or are they nearly extinct?
06-03-04, 08:24 PM
#15
13B N/A POWA!
Join Date: Apr 2002
Location: Everywhere, WRLD
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
I have no loot right now so it does me no good (thx though...maybe sometime soon). I just wanted to know to see how those really stacked up to the stock ones. I looked at them about a week ago and was extremely happy cuz I want my car to look stock for the most part. That's not a bad deal at all...not at all. BTW...asherwood where did you get your mindtrain stuff? I haven't seen that in forever and nobody seems to know what happened to them.
06-03-04, 10:01 PM
#16
Originally posted by vaughnc
HELLO!!!! - you CAN paint them
HELLO!!!! - you CAN paint them
For only $200, I though they might be worth a gamble.
06-04-04, 12:29 AM
#19
Senior Member
Join Date: Jan 2003
Location: the nati, ohio
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by gz91rx7
I would pay a premium for a stock S5 TII lip or a copy of the FEED lip.
I would pay a premium for a stock S5 TII lip or a copy of the FEED lip.
Near the bottom.
06-04-04, 12:34 AM
#20
You can still get the factory stock lip, but only in a few colors.
As for the side skirts, they are no longer available from factory, you have to find them used, but they're not cheap. I paid $300 for a used set, then spent another $400 having them repaired, painted, and installed.
I think the skirts pictured above look like they would fit an FB, they kinda look too small on that FC, imo.
As for the side skirts, they are no longer available from factory, you have to find them used, but they're not cheap. I paid $300 for a used set, then spent another $400 having them repaired, painted, and installed.
I think the skirts pictured above look like they would fit an FB, they kinda look too small on that FC, imo.
06-04-04, 12:36 AM
#22
Senior Member
Join Date: Jul 2001
Location: Muskegon, Mi
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mills
You can still get the factory stock lip, but only in a few colors.
As for the side skirts, they are no longer available from factory, you have to find them used, but they're not cheap. I paid $300 for a used set, then spent another $400 having them repaired, painted, and installed.
I think the skirts pictured above look like they would fit an FB, they kinda look too small on that FC, imo.
You can still get the factory stock lip, but only in a few colors.
As for the side skirts, they are no longer available from factory, you have to find them used, but they're not cheap. I paid $300 for a used set, then spent another $400 having them repaired, painted, and installed.
I think the skirts pictured above look like they would fit an FB, they kinda look too small on that FC, imo.
Where can I get the stock lip from? I called the local mazda dealers and they couldnt pull up the part number I found on forum
06-04-04, 10:15 AM
#23
knowledge junkie
Thread Starter
