pics - fast13b's TII is on ebay - SERIOUSLY modded
#1
knowledge junkie
Thread Starter
pics - fast13b's TII is on ebay - SERIOUSLY modded
hmm... this TII looks familiar.
Lo & behold it's fast13b's
Wish I found one like this when I was buying mine.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1841349369
Here's his mod list:
I bought this car from the head sales rep at A'pexi. From his hookups in Japan he sourced some unique stuff and the car is really a one of a kind.
- 1989 RX-7 Turbo chassis, red, re-painted. No accidents.
- 1990 Japanese motor, street ported. Imported with 30,000 km and rebuilt, 6,000 mi on the rebuild. New rear plate put on 500 mi ago. Mobil 1 oil used exclusively.
- OMP removed, requires premix.
- Haltech E6a computer, laptop included
- Apex'i AVC-R boost controller
- HKS mega flow intake
- Garrett T66 compressor ar .55, 2.582" inducer & 3.584" major/
- T04 turbine ar 1.15 divided tangental w/ p-trim wheel
- Zen blow off valve
- XS engineering divided tangental cast iron exhaust manifold
- HKS racing 50mm wastegate, 7 lb spring
Spearco 3" front mount intercooler
- 3" custom down pipe
- R E Amemiya exhaust, one of a kind in U.S.
- SX aluminum fuel pump and adjustable fuel pressure regulator
- 10 AN SS braided fuel lines
- RC engineering 550cc primary / 1600cc secondary injectors
- MSD digital 6 plus, leading, w/ MSD motorcycle twin post coil
- MSD DIS 2, trailing, w/ 2 MSD Blaster 2 coils
- Magnecor R-100 plug wires
- HKS 4 gauge instrument cluster
- Mazda Competition race radiator
- Spal shrouded dual electric fan
- Copper 6 puck sprung clutch
- SS braided oil lines, brake lines, clutch line
- Apex'i slotted brake rotors
- Apex'i brake pads
- RE Amemiya rear wing
- Kaminari front spoiler
- Racing Beat front sway bar
- Koni adjustable suspension w/ coilovers
- Adjustable camber plates
- Panasport racing custom 17x7.5 front, 17x9 rear, custom made and one of a pair in the US
- Momo steering wheel w/ quick release
- Short throw shifter w/ Razo ****
- Racing Beat aluminum flywheel
- Mazda Competition motor and tranny mounts
- Oil baffle plate
- Oil pressure riser
- Eccentric shaft oil bypass pellet
- Napa sealed dry cell battery in trunk
- AC converter
- Decent aftermarket stereo system w/ amp and 1 sub
Lo & behold it's fast13b's
Wish I found one like this when I was buying mine.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1841349369
Here's his mod list:
I bought this car from the head sales rep at A'pexi. From his hookups in Japan he sourced some unique stuff and the car is really a one of a kind.
- 1989 RX-7 Turbo chassis, red, re-painted. No accidents.
- 1990 Japanese motor, street ported. Imported with 30,000 km and rebuilt, 6,000 mi on the rebuild. New rear plate put on 500 mi ago. Mobil 1 oil used exclusively.
- OMP removed, requires premix.
- Haltech E6a computer, laptop included
- Apex'i AVC-R boost controller
- HKS mega flow intake
- Garrett T66 compressor ar .55, 2.582" inducer & 3.584" major/
- T04 turbine ar 1.15 divided tangental w/ p-trim wheel
- Zen blow off valve
- XS engineering divided tangental cast iron exhaust manifold
- HKS racing 50mm wastegate, 7 lb spring
Spearco 3" front mount intercooler
- 3" custom down pipe
- R E Amemiya exhaust, one of a kind in U.S.
- SX aluminum fuel pump and adjustable fuel pressure regulator
- 10 AN SS braided fuel lines
- RC engineering 550cc primary / 1600cc secondary injectors
- MSD digital 6 plus, leading, w/ MSD motorcycle twin post coil
- MSD DIS 2, trailing, w/ 2 MSD Blaster 2 coils
- Magnecor R-100 plug wires
- HKS 4 gauge instrument cluster
- Mazda Competition race radiator
- Spal shrouded dual electric fan
- Copper 6 puck sprung clutch
- SS braided oil lines, brake lines, clutch line
- Apex'i slotted brake rotors
- Apex'i brake pads
- RE Amemiya rear wing
- Kaminari front spoiler
- Racing Beat front sway bar
- Koni adjustable suspension w/ coilovers
- Adjustable camber plates
- Panasport racing custom 17x7.5 front, 17x9 rear, custom made and one of a pair in the US
- Momo steering wheel w/ quick release
- Short throw shifter w/ Razo ****
- Racing Beat aluminum flywheel
- Mazda Competition motor and tranny mounts
- Oil baffle plate
- Oil pressure riser
- Eccentric shaft oil bypass pellet
- Napa sealed dry cell battery in trunk
- AC converter
- Decent aftermarket stereo system w/ amp and 1 sub
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post