I always like to see others engine bays. Some times i get ideas from it.

Well i got my car working the way i want it so i'd figure i'd post my engine.

Can someone host the images for me?

Any suggestions or comments would be appreciated.

 

Heres mine



somewhat differn't know

e-mail me your pics and I'll post them, morphious@satx.rr.com

 

Mine lookin really ugly, dirty, and stock! :P

 

i sent the pics.

looking at your bay i just remeberd the obvious.........i need strut bars ;0 I wanted to go with the tri strut bars. They have a few on ebay.

 

And Sonic what are you doing with that Fram in there???

 

6 port 13b in a first gen. (you cant see it in this picture, but its blown at 127,000 miles).

Apex seal is somewhere in the exhaust.

Soon i'm going to have one of those ^ engines in it.

 

Damn you noticed the FRAM but ignored my smashed main fuse? Jeez, people and their oil filters! Hehehe, don't worry, it's been replaced with a OEM. Didn't even put 4 hours worth of running on that fram

 

well I was gonna give you crap about the fuse, but I thought you already felt bad about using a pliers to remove a fuse that is screwed in.

 

Is that the CAS "Cap Mod" too?

 

Ouch, beat on rat day! And i didn't use pliers to remove it, I used pliers to jumper it until I hauled my *** down to the parts store to pick up another. And the CAS cap was removed because I had just restabbed the CAS, and you'll notice I'm missing an intake duct as well, and my intercooler hose isn't past the ring edge, so it can blow off under boost (cuz I was adjusting the TPS) Anything else ya damn vultures!

 

not beating... just teasing a little

 

um what is wrong with fram? im using it right now. is that bad?

also in the first 2 is it me or are u guys missing ya fans?

 

And the Main Fuse cap mod!

 

http://www.scuderiaciriani.com/rx7/oil_filter_study/

 

And the no hold down bolts on the intercooler mod (weight reduction, stage 1).

Jarrett

 

rat you're about to get your *** kicked! (this is an observation of something that MIGHT happen, not saying it will or I am doing it, so don't ya go warning me for threatening someone!) My fan's sitting in my trunk, along with the inlet duct (in the pic, at the time). The FMIC is no longer sitting up there, it's hiding up behind my bumper, and the fuse has been replaced, the inlet duct has been installed, and the cas cover replaced. Now, who's next on my shoot from 300 yards list?

 

rat fight!

 

So far I've only managed 1/4 of this mod. I plan to mysteriously lose the other three bolts soon...

 

Alright, you guys wanna be funny asses? Well here's my OTHER engine bay. WEIGHT REDUCTION OWNS YOU!

 

God, where do I start? No engine mod?

Is this an official thread hijack, or what?

 

Wow, for about 3 seconds i thought you were posting my engine bay. No seriously, the only diff between your pic and mine is i don thave a tranny in either

Guess i got you all beat with the tranny and exhaust mod
Weight Reduction Stage 2

 

AHH! I will not be outdone! Time to remove the tranny, driveshaft, exhaust *AND* rear-end! Stage 3 here I come! Anyway, on a more serious note, do you also have a gold car?

 

 

Not the greatest pic, but it's floating around on the web from SS5. My engine bay is currently be overhauled with a bigger turbo and a few other goodies

Note the special fan shround mod to accomodate my radiator. That was a quicky mod, the e-fan will be in soon with the other goodies.

 

Right now its a bit of a mess...

[IMG]C:\Documents and Settings\loitzenbaj\My Documents\My Pictures\Net\bigmess.jpg[/IMG]