ok last night i won some cool stuff on ebay

i got a good j-spec s5 turbo and manifold
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425635119
and
an a j-spec upper and lower intake and TPS with throttle body
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425635452

this says it will bolt right up to a s4 enigne.....will it?

if not what all will i have to do to make it bolt up?

AND

will this setup require more fuel?
im thinking of making a manual boost controller so i can keep it to like 10 psi.....
the auction said it would flow better due the the EGR not being present.....
would i need to add fuel?

 

The TPS is worth at least that on its own. Yes it will bolt up but you will have to make some wiring modifications. For instance you have to use your old TPS wiring from your s4, because the s4 ecu only has input for one tps whereas the s5 is a dual plunger tps. Also the vacuum lines have a little different routing if i recall correctly. But it should work out fine

Good luck!

 

i was going to bid on the manifolds, i need the jspec lower but decided not to yet. going to buy it from him through email. hes also on the forums "crjrx7".

 

sweet...thanks for the input...
about the wiring....i will be running a s4 harness.......as the engine, ecu, an car are all series 4....
will i actually be chaning the harness or just the connector.....how hard is this ?

 

poo