2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

parking lights stay on

Thread Tools
 
Search this Thread
 
Old 12-31-02, 10:27 AM
  #1  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
parking lights stay on

whenever my ignition is on my side marker and parking lights come one. even if the switch is off. anyone know why or is this normal?
Old 12-31-02, 10:55 AM
  #2  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
is the car equipped with an aftermarket alarm???

if so, then that is what I would look at first.

if not then look at the back of the light switch... chances are it is melted
Old 12-31-02, 12:55 PM
  #3  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
the lightswitch ont he dash right?
Old 12-31-02, 04:55 PM
  #4  
Huh?

 
AreExSeven's Avatar
 
Join Date: Nov 2001
Location: Lost
Posts: 1,087
Likes: 0
Received 0 Likes on 0 Posts
Yes, the one on the steering wheel surround. It can all melt together from excess heat (probably caused by those shitty relays), and would create a circuit every time the accessory wire is powered, lighting up the parking lights.

Do your console lights come on when you do this too?
Old 12-31-02, 06:10 PM
  #5  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by AreExSeven
Yes, the one on the steering wheel surround. It can all melt together from excess heat (probably caused by those shitty relays), and would create a circuit every time the accessory wire is powered, lighting up the parking lights.

Do your console lights come on when you do this too?
There are no relays, except for the highbeams... and they almost never cause problems.

and the parking lights are not related to the accessory wire or circuit in the car what so ever.

However if micky mouse wired the radio, that too could cause the problem
Old 12-31-02, 06:14 PM
  #6  
Rotary Enthusiast

 
apreludem's Avatar
 
Join Date: Oct 2002
Location: houston
Posts: 905
Likes: 0
Received 0 Likes on 0 Posts
ok...how about mine...my stupid lights dont come on (blinkers) i can here the tick tick noise they make, but they dont come on inside or outside. they have never worked exept this one time for like 5 minutes, then they shut themselfs off. headlights work fine, so do break lights, but hazzards and blinkers dont. i checked my light switch and it is not melted.
Old 12-31-02, 06:30 PM
  #7  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by apreludem
ok...how about mine...my stupid lights dont come on (blinkers) i can here the tick tick noise they make, but they dont come on inside or outside. they have never worked exept this one time for like 5 minutes, then they shut themselfs off. headlights work fine, so do break lights, but hazzards and blinkers dont. i checked my light switch and it is not melted.
Bad or cold solder joints in CPU
Old 12-31-02, 08:32 PM
  #8  
Rotary Enthusiast

 
apreludem's Avatar
 
Join Date: Oct 2002
Location: houston
Posts: 905
Likes: 0
Received 0 Likes on 0 Posts
cpu...damnit..i thought i resolder those...that would be the one underneath the driver right..
Old 12-31-02, 10:46 PM
  #9  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
the radio is wired in with the factory plug adapter and grounded to the metal frame inside. not half assed at all. i will check it when i replace the gauge faces and resolder the swtich contacts. i already did the cpu
Old 01-01-03, 12:35 AM
  #10  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by Moxeys93RX7
the radio is wired in with the factory plug adapter and grounded to the metal frame inside. not half assed at all. i will check it when i replace the gauge faces and resolder the swtich contacts. i already did the cpu
Do the lights come on with ignition or accessory???

if it is accessory, check the radio lumination wire (Factory red/black) is not hooked up to the factory accessory (blue/white).

Its very common to see someone wire the red/black as ground for the radio or tie it into the blue/white.

and have you checked the light switch yet.

The CPU wouldn't have anything to do with it, unless it is just the turn signals and not the parking/dash lights.
Old 01-01-03, 08:44 AM
  #11  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
just the side marker lights come on. the radio is grounded to the chassis straight off the radio. i did hook up the dimmer wire but it goes form the radio to the plug adapter harness. then just plugs in
Old 01-01-03, 09:41 AM
  #12  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
i don't know if it is related but i blew my meter fuse ( right after it happened the upshift light was coming on in 5th) so im guessing that's shot too. the light backlighting doens;t come on for the switches on the right of the column. and every now and then i have to hit the dash to get the gauge lights to come on. maybe loose connection?
Old 01-01-03, 09:50 AM
  #13  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
oh yeah and my defroster won't shut off
Old 01-01-03, 10:47 AM
  #14  
On the prowl for an FB

iTrader: (1)
 
$100T2's Avatar
 
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes on 4 Posts
I don't know about the defroster, but if the radio is hooked up to the wrong wire, it will turn the parking lights on... It happened to me, because I followed the "instructions" on a radio install kit made "specifically" for RX-7's.
Old 01-01-03, 11:56 AM
  #15  
Senior Member

Thread Starter
 
Moxeys93RX7's Avatar
 
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
do u remember which wire you hooked up wrong?
Old 01-01-03, 08:33 PM
  #16  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by Moxeys93RX7
oh yeah and my defroster won't shut off
anything else you'd like to tell us???

Don't mean to be short, but when trouble shooting electrical you need to know ever single thing wrong, because they can be related.

I am assuming the rear defroster??? it should shut off with the switch, or after 11 minutes. Either that or you don't have the rear defroster hooked up on the hatch.

The radio plug adapter should not connect the parking lights to anything. Disconnect the wire.

If you are still having problems then the next step will be looking at the back of the light/defroster switchs.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
gabescanlon
3rd Generation Specific (1993-2002)
4
09-05-15 12:04 AM



Quick Reply: parking lights stay on



All times are GMT -5. The time now is 09:47 AM.