2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

OMP question?

Thread Tools
 
Search this Thread
 
Old Jul 9, 2005 | 03:34 PM
  #1  
jm93rx7's Avatar
Thread Starter
Committee Member #3
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Sep 2003
Posts: 3,156
Likes: 1
From: S. Florida
OMP question?

I tried to take out the OMP today to put the block off plate but was not succesfull in removing the oil injectors.. I allready filled the tank up with premix. I took out the rod that goes from the omp to the throttle body is the car safe to drive like that atleast till i get to the mech on monday?
Reply
Old Jul 9, 2005 | 04:51 PM
  #2  
jm93rx7's Avatar
Thread Starter
Committee Member #3
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Sep 2003
Posts: 3,156
Likes: 1
From: S. Florida
^^^^
Reply
Old Jul 9, 2005 | 05:01 PM
  #3  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Yes. No harm will be done at all. You could just do your premix thing and leave the rest in place if you wanted to. With no rod the omp isn't going to inject much of anything at all. In fact you might just save yourself some dough and trouble and do just that.
Reply
Old Jul 9, 2005 | 05:02 PM
  #4  
jm93rx7's Avatar
Thread Starter
Committee Member #3
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Sep 2003
Posts: 3,156
Likes: 1
From: S. Florida
thank you very much.........
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
cewrx7r1
3rd Generation Specific (1993-2002)
15
Aug 6, 2018 11:41 AM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 07:24 AM.