2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
View Poll Results: What would you do with this car?
Sell it for a enough to rebuild the MR2 engine ($3000+)
13.95%
Sell it for anything, just get rid of it!
9.30%
Keep it, you are crazy to even think about selling that nice RX7!
32.56%
It is a nice car and i would have a hard time deciding too
13.95%
Drop a V8 in it
9.30%
Do a Turbo Swap
51.16%
Multiple Choice Poll. Voters: 43. You may not vote on this poll

Ok, i am at a cross-roads with my car, need advise!

Thread Tools
 
Search this Thread
 
Old Dec 29, 2008 | 08:15 AM
  #26  
Go48's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Feb 2005
Posts: 1,608
Likes: 3
From: Mont Alto, PA
Had a similar situation recently. Ended up buying a low-mileage S5 Turbo and then selling my S5 NA for $4,500.00, which nearly paid for the Turbo. Of course, I have sunk a good bit of $$$ into the Turbo since then, but it is now almost ready for the HPDE season and it runs like a champ.
Reply
Old Dec 29, 2008 | 09:53 AM
  #27  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by Go48
Had a similar situation recently. Ended up buying a low-mileage S5 Turbo and then selling my S5 NA for $4,500.00, which nearly paid for the Turbo. Of course, I have sunk a good bit of $$$ into the Turbo since then, but it is now almost ready for the HPDE season and it runs like a champ.
$4500 for an NA? Wow, that is a lot.

I think i have decicded to let the people decide for me. lol

I am going to list it fo $3500 and just not come down. Soemone wants it, then i sell it, no one wants it for that price, then i keep it and bolt on a turbo.

A whole lot easier then trying to decide on my own.

Plus if i only got $3000 for it it would almost not be worth selling it as i would still be short getting the MR2 engine rebuilt.

Then keep my eyes out for a nice Turbo. I saw a TII 10th AE a few months back witha blown engine for $1500, i am still kicking myself for not getting it, it was MINT too. i will just hope for another one.
Reply
Old Dec 29, 2008 | 10:06 AM
  #28  
RxFuel's Avatar
Ten cents gets ya nutz!
Tenured Member 05 Years
iTrader: (1)
 
Joined: Dec 2006
Posts: 311
Likes: 0
From: Branchburg, NJ/Exton, Pa
sounds like a good plan hopefully it works out, but if it doesn't sell and you keep it what do you plan to do about the mr2 build?
Reply
Old Dec 29, 2008 | 10:12 AM
  #29  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by RxFuel
sounds like a good plan hopefully it works out, but if it doesn't sell and you keep it what do you plan to do about the mr2 build?
Thats the real problem, i won't have $$$ to do that for some time and i don't have a place to store the car.

I will either have to park my truck on the street (already been broken into once) or i will just have the sell the MR2 as it sits.

Or most likely i will do a basic, cheap rebuild. Just the must do's, bore, pistons/rings, machine anything that needs it and put it back together.
Reply
Old Dec 29, 2008 | 10:21 AM
  #30  
RxFuel's Avatar
Ten cents gets ya nutz!
Tenured Member 05 Years
iTrader: (1)
 
Joined: Dec 2006
Posts: 311
Likes: 0
From: Branchburg, NJ/Exton, Pa
You could buy a car cover for the Mr2 a cheap autozone one, like 60 bucks and they are actually good quality had mine for about 2 years and a lock cable to go under it, that's what I did for my 7 when I didn't have a place to store it for a few months.
Reply
Old Dec 29, 2008 | 10:23 AM
  #31  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by RxFuel
You could buy a car cover for the Mr2 a cheap autozone one, like 60 bucks and they are actually good quality had mine for about 2 years and a lock cable to go under it, that's what I did for my 7 when I didn't have a place to store it for a few months.
Never even thought of that, that just might work. They can't see the inspection sticker so i don't know why or how they would give me a ticket.

If worst comes to worst i just might do that.
Reply
Old Dec 30, 2008 | 03:58 AM
  #32  
The Shaolin's Avatar
Canned. I got CORNED!
Tenured Member 05 Years
iTrader: (5)
 
Joined: Mar 2007
Posts: 1,029
Likes: 0
From: Appleton, WI
That 7 is gorgeous. Keep it stock and DD it. Save up money and make the MR2 the fast car.
Reply
Old Dec 30, 2008 | 09:56 AM
  #33  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by The Shaolin
That 7 is gorgeous. Keep it stock and DD it. Save up money and make the MR2 the fast car.
Thats exactly what i was planning on doing, until i supercharged my truck.

Now my truck is my DD due to it being; Faster, newer, safer, more comfortable, getting better MPG, able to haul more stuff, able to smoke any honda it see's.

Now there is really no point to driving the RX7 other then just for for fun since the truck does everything but take corners better. and i don't drive enough to really get the insurance payment out of the car if i just drive it for fun here and there (though i will admit it is more fun to drive then my truck).

I have it listed for $3500, if someone wants it then great, i was supposed to sell it. If no one wants it then i was meant ot keep it. I am taking the easy way out. Plyus this will give me enough $$$ to get my engine rebuilt right in the MR2 with no waiting.

Though i am woundering why neither of my for sale threads for either car have shown up in the classifieds here yet, i was sure to follow all the rule but 4 days later, nothing?
Reply
Old Dec 30, 2008 | 10:29 AM
  #34  
Go48's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Feb 2005
Posts: 1,608
Likes: 3
From: Mont Alto, PA
Originally Posted by Texas_Ace
$4500 for an NA? Wow, that is a lot. I think i have decicded to let the people decide for me. lol I am going to list it fo $3500 and just not come down. Soemone wants it, then i sell it, no one wants it for that price, then i keep it and bolt on a turbo.
With these cars, condition will dictate the asking price. Check out the car I sold for $4,500.00:
https://www.rx7club.com/2nd-generation-rx-7-1986-1992-vehicles-108/fs-1990-gtu-base-model-top-condition-786835/.

People who price these cars based on year/model and not on condition don't understand what value is based on. Try listing it on Autotrader.com with lots of high-quality pics. I've sold two cars this year that I listed there. And remember, it's easier to start at a higher price (but reasonable) and then come down on price for a quick sale, but you cannot increase the price from your asking price. Buyers are looking for a "deal" and will tend to go for a reduced-price deal over a firm, fixed price. It's human nature. I have a friend who will buy just about anything if he gets it at a reduced price.
Reply
Old Dec 30, 2008 | 10:39 AM
  #35  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by Go48
With these cars, condition will dictate the asking price. Check out the car I sold for $4,500.00:
https://www.rx7club.com/showthread.php?t=786835.

People who price these cars based on year/model and not on condition don't understand what value is based on. Try listing it on Autotrader.com with lots of high-quality pics. I've sold two cars this year that I listed there. And remember, it's easier to start at a higher price (but reasonable) and then come down on price for a quick sale, but you cannot increase the price from your asking price. Buyers are looking for a "deal" and will tend to go for a reduced-price deal over a firm, fixed price. It's human nature. I have a friend who will buy just about anything if he gets it at a reduced price.
Yeah, i thought about lsiting it at $4000 or $4500 to start with but looked around and relized it was a bit high. I might try bumping the price upa little and then come down to $3500.

Though i have a guy that says he wants the car for $3500 today if he can find the $$$. So i might already have it sold. We will see.
Reply
Old Dec 31, 2008 | 12:06 AM
  #36  
AreExSevenProject's Avatar
drift city
iTrader: (1)
 
Joined: Nov 2007
Posts: 359
Likes: 0
From: Oregon
Doesnt look like it is that finished. Keep going. the front bumper looks pushed in. Make it into a fully built T2!
Reply
Old Dec 31, 2008 | 10:01 AM
  #37  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by AreExSevenProject
Doesnt look like it is that finished. Keep going. the front bumper looks pushed in. Make it into a fully built T2!
Fully finished? Maybe not, but it is as finished as it will be for a good long time. I really don't care much about how the outside looks until everything else is 100% finished.

I have reached that point with this car. The problem is that when i do things, i do them right. So to have it painted right would run me well over $1000. I won't have that much $$$$ to put into this car for a LONG time.

I actually have another bumper i could put on it right now but it would not match so i figure it looks better with a matching but slightly dented bumper then a non-matching but perfect bumper.

Plus it looks worse in the pictures. In person if you are more then 10 feet away the paint job looks almost perfect. at dusk the paint almost glows, it is a real neat color i have fallen in love with to a degree.

If it doesn't sell for what i want though i do plan to finish it up at some point. I have had a lot of intrest in it just no one with the cash yet.

Where do ya'll list your cars that work well? RX7Club doesn't like me or something i have tried listing 3 threads in the BST section but none of them are posted, i followed all the rules, so i have no idea why. It is already on craigslist and ebay. Any other good sites for free/cheap?

Last edited by Texas_Ace; Dec 31, 2008 at 10:04 AM.
Reply
Old Dec 31, 2008 | 03:42 PM
  #38  
Go48's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Feb 2005
Posts: 1,608
Likes: 3
From: Mont Alto, PA
Originally Posted by Texas_Ace
Though i have a guy that says he wants the car for $3500 today if he can find the $$$. So i might already have it sold. We will see.
Yeah, you may get a bunch of those. They're referred to as BeBacks: "I love the car, I'm gonna get the money and I'll be back". I had at least half dozen of those with the '90 NA I before I sold it.
Reply
Old Dec 31, 2008 | 04:20 PM
  #39  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by Go48
Yeah, you may get a bunch of those. They're referred to as BeBacks: "I love the car, I'm gonna get the money and I'll be back". I had at least half dozen of those with the '90 NA I before I sold it.
LOL, yeah i have delt with then plenty myself. This guy sounded more serious then most though.

I do have a kid that talked to me that is looking for a first car that is interested. From the way i hear it he wants the car bad but is having trouble conviencing his dad that it is the right car for him.

He started out asking the questions i would expect from a kid looking for his first car, how fast is it, how much power, things like that, then he suddely changed to, how many miles?, does it run?

Who knows but this looks like the most promising guy so far if he can get the go ahead. I keep trying to get him to come look at the car, i know once he sees it, it is like someone holding a puppy they are not sure about, he will jsut have to take it home..lol
Reply
Old Dec 31, 2008 | 04:24 PM
  #40  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
Originally Posted by Texas_Ace
i know once he sees it, it is like someone holding a puppy they are not sure about, he will jsut have to take it home..lol
Or the "puppy" pees on him then goes for his throat.
Reply
Old Dec 31, 2008 | 05:59 PM
  #41  
Healing's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: May 2005
Posts: 468
Likes: 0
From: Seattle
Put it up for sale. If you find a buyer, then you'll decide what you want to do later.
Reply
Old Dec 31, 2008 | 06:58 PM
  #42  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
Originally Posted by clokker
Or the "puppy" pees on him then goes for his throat.
LOL true.

Originally Posted by Healing
Put it up for sale. If you find a buyer, then you'll decide what you want to do later.
It is for sale on ebay and craigslist. Anyone got any other good sites? plan on putting it on autotrader if it doesn't sell by the end of the month.

Most promising buyer so far is that kid that wants a first car. He is trying to get his dad to come look at it. I can tell the kid would buy it for sure if his dad gives him the OK.

So heres hoping, I upped the price to $4000 before he saw the ad too so i might even get more then i wanted at first. but i will come down to $3500 to sell it if i have to. Either way he is getting a deal when you add all the time and $$$$ i have put into the car that he won't have to. All it needs is tires and it is good to go for some time.

I did just call the place that will rebuild my MR2 engine if this sales and got a semi-final price (mius the nickel and dime stuff that is always extra) at right at $3500 - $4000. So this should work out good for everyone.

But i also took it for a drive today and lets just say it didn't make selling it any easier.
Reply
Old Jan 1, 2009 | 02:11 PM
  #43  
Texas_Ace's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (18)
 
Joined: May 2008
Posts: 1,150
Likes: 0
From: Texas BABY!
LOL, i had a question i never thought i would get from this kid that wants the car.

He sends me this e-mail:

"there's nothing really wrong with the car right? I was just curious since your asking for such a low price on it, when it looks really good for being such an old car."

He thinks i am trying to scam him with a lemon due to a "low-price". Wounder why he thinks it is a low price?

though looking around the price is a lot more fair then i first thought, i have seena lot of RX7's for $3000-$4000.

Considering the condition of the car and all the parts and time and $$$ i have put into it $4000 seems quite fair, i don't know that i would go below $3750 now, i need all the $$$ i can get.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
Sep 2, 2015 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM
WLD.RX7
Introduce yourself
1
Aug 16, 2015 09:43 AM




All times are GMT -5. The time now is 11:21 AM.