oil pump Question
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Location: sarasota fl
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
oil pump Question
hey is there a way you can bypass the whole metering oil pump it keeps trowing code 27 and putting it in safe mode and wont let the car go ove 4000 rpm can i do somthing to make this work or bypass the this and premix
pm me the info thanks guys
pm me the info thanks guys
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Digital Tuning at this site: http://www.digitaltuning.com/index.p...age=1&ecu=S5NA
Doing that will give you the option to pre-mix without replacing the electrical OMP.
Doing that will give you the option to pre-mix without replacing the electrical OMP.
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
"THEY" claim one oz of the pre-mix to one gallon of gasoline. I don't pre-mix so I make no claim that is right or wrong.
Maybe SEARCH on this forum for PRE-MIX and RATIO????????? Or Premix and ratio, or??????
Maybe SEARCH on this forum for PRE-MIX and RATIO????????? Or Premix and ratio, or??????
#5
2nd Gen. Enthusiast
Join Date: Feb 2006
Location: New Hampshire
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
The "best" ratio I have heard to run is around 100:1. If you use 1 oz. mixing oil to one gallon of gas you get a 128:1 ratio. This makes it easy to figure out how much oil to use.
There is also a thread on modifying the OMP to run premix only.
Or check out Rotary Aviation. The sell adapter blocks that do the same as the OMP modifiation, but is alot easier to do.
There is also a thread on modifying the OMP to run premix only.
Or check out Rotary Aviation. The sell adapter blocks that do the same as the OMP modifiation, but is alot easier to do.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM