oil pressure gage don't work after tranny
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Sewickley,Pa
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
oil pressure gage don't work after tranny
hey all,
i recently put in a new clutch and tranny, and for wutever reason the oil pressure gauge stopped working? it worked when i pulled it up onto the ramps, and after everything was said and done the gauge doesn't work...
i know there is oil in it, i did the oil change at the same time.....
am i missing something?
i recently put in a new clutch and tranny, and for wutever reason the oil pressure gauge stopped working? it worked when i pulled it up onto the ramps, and after everything was said and done the gauge doesn't work...
i know there is oil in it, i did the oil change at the same time.....
am i missing something?
#3
Junior Member
Thread Starter
Join Date: May 2007
Location: Sewickley,Pa
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
the wiring is all good no problems there, i'll check that, and get back to you, but i don't even remember pulling any wires out from around there?
we shall see
we shall see
#4
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,814
Received 2,583 Likes
on
1,834 Posts
i think anyone who's worked on these cars for any lenght of time has done it...
Trending Topics
#8
Junior Member
Thread Starter
Join Date: May 2007
Location: Sewickley,Pa
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
ok, i never remember even seeing that, but i'll got take the cylinder off...and there are like 2 extra wires around the oil filter.....but, i got the car like 5th hand, and i don't even know wuts done to the car...................
something about a mildly ported intake side?????
guess it has a small street port.....
something about a mildly ported intake side?????
guess it has a small street port.....
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
20B Forum
8
08-18-15 02:46 PM