oil leak at the oil level sensor...
#1
Full Member
Thread Starter
Join Date: Apr 2001
Location: morgan hill, ca, usa
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
oil leak at the oil level sensor...
to my knowledge, there is no gasket for this, right, it just gets bolted on the oil pan. anyone have tips for fixing this if bolting it down harder doesn't work?
i was thinking making my own gasket and using some gasket sealer on it....any other alternatives or advice on doing this (good idea/bad idea)?
john
ps - this is on a 91 n/a
i was thinking making my own gasket and using some gasket sealer on it....any other alternatives or advice on doing this (good idea/bad idea)?
john
ps - this is on a 91 n/a
#2
Lives on the Forum
Replace it.
It's supposed to be sealed internally, but oil does get around the seal for some vehicles.  Trying to pry open the sensor and fixing the seal will most likely kill the sensor itself.
-Ted
It's supposed to be sealed internally, but oil does get around the seal for some vehicles.  Trying to pry open the sensor and fixing the seal will most likely kill the sensor itself.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM