oil inlet pipe?
08-29-06, 11:32 AM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: mass
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
oil inlet pipe?
In installing a new stock turbo, my turbo inlet pipe got bent slightly, which punctured it, so when i started the car up it squirted oil. so i have tryed various parts stores, websites, and mazda for the oil inlet pipe, but i cant seem to find one anywhere. does anyone know where to get either a stock turbo inlet pipe, or the fittings to install a steel braided line in its place?
08-29-06, 03:01 PM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
It's a Mazda only piece.
You can use braided line fairly easily. The thread pitch of the banjo bolt on the front iron can be found in the thread pitch article in the archives. Get the appropriate AN adapter and make up your line using either -6 or -4. To connect to the turbo, you will need to tap out the feed hole in the center section or get a flange (from somewhere like ATP Turbo).
You can use braided line fairly easily. The thread pitch of the banjo bolt on the front iron can be found in the thread pitch article in the archives. Get the appropriate AN adapter and make up your line using either -6 or -4. To connect to the turbo, you will need to tap out the feed hole in the center section or get a flange (from somewhere like ATP Turbo).
Thread
Thread Starter
Forum
Replies
Last Post