fc3sna

hey i got some SS oil cooler lines that i need to put on my current car. what i need to know is if anyone knows the size of the crush washer for the cooler lines, and how many do i need, i know its two per banjo bolt. but how many are there and what else do i need to install them, i . e . washer sizes if i need them and stuff.
thanks
tommy
imediant response please i got to try and fix my car today.

Aaron Cake

iTrader: (1)

So you have the old washers handy? If so, then just take them to a hydraulic store or fastener store and say "I need 6 of these".

fc3sna

i dont have them with me, i took of the two ends on the oil cooler and they fell into my drain pan so i left them there and then my step dad tosed the old oil so he could change his. i have to get the two ends off the engine but i have to bust out with the breaking pipe, and air tools. also im a 1/2 hour south of where i live, i was just hoping someone would know.

j9fd3s

iTrader: (3)

factory part number is 9956-21-800, copper is expensive....

HAILERS

I've never used a new one. Does that make me a Bad Person? No. And I have no leakage. EVER.

fc3sna

well for all that wonder the washer on the front of the engine( AN style) is a 16mm , while all the banjo bolts are 18mm, thanks to mazda trix.