Im tryin to start a used motor should I use oil or ATF in it to get some compression built up to start it . It has sat for a while and I just got it put in today but it just floods. A little smoke out the exhaust but wont fire up. It has had ATF in it while sitting and turned over by hand 2 times aweek . If I do the oil or ATF how much do I put in the rotors to get compression up .

 

try pulling the egi fuse and use oil, atf isn't the best for the engine, if you must use aft add it to the gas...

 

how much oil shoulg go in each rotor just to be sure ?

 

TRY PUSH OR TOW STARTING IT FIRST!!!! This is in my opinion a much safer way to fire that motor.

Rat