Official Finish Line (Dealership Original) Accessories Thread
10-07-10, 10:31 AM
#1
Right near Malloy
Thread Starter
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,825
Received 499 Likes
on
338 Posts
Official Finish Line (Dealership Original) Accessories Thread
This is an info thread. Start another thread for opinions and such. If you can fill in any verifiable info, please do so.
First and foremost, the body kit...
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/finish-line-aero-package-435419/ (Another thread with pics and info on the kit.)
https://www.rx7club.com/2nd-generation-non-technical-pictures-198/trying-figure-out-what-oem-aero-came-my-car-899698/ (Pic Thread)
Note that the front and rear end pieces are THREE PIECES. Do not confuse with the Erebuni or Kaminari body kits which are ONE PIECE. It is also molded of ABS plastic just like the front and rear factory bumper covers. Most other aftermarket kits are molded from fiberglass.
1.) Front Fascia/Valence
2.) Left Front Fender Trim
3.) Right Front Fender Trim
4.) Left Side Skirt
5.) Right Side Skirt
6.) Left Rear Panel Trim
7.) Right Rear Panel Trim
8.) Rear Bumper Finisher
S/R) Spoiler/Roof Band - Consists of multiple parts (I've heard up to three pieces each, total six. More info needed; I don't have this part of the kit.)
From the parts I DO have there are part numbers stamped into the plastic.
OE Mazda Part Numbers:
1.) 0000-86-2186 CC / FB01 V4 901
2.) 0000-86-2186 LL / FB01 V4 903
3.) 0000-86-2186 RR / FB01 V4 902
4.) 0000-86-2086 LL / FB01 V4 913
5.) 0000-86-2086 RR / FB01 V4 911
6.) 0000-86-2786 LL / FB01 V4 933
7.) 0000-86-2786 RR / FB01 V4 932
8.) 0000-86-2786 CC / FB01 V4 931
Interestingly enough, it's stamped Made in USA... It's off of a Red 1986 model. 1987 and other color part numbers may vary.
First and foremost, the body kit...
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/finish-line-aero-package-435419/ (Another thread with pics and info on the kit.)
https://www.rx7club.com/2nd-generation-non-technical-pictures-198/trying-figure-out-what-oem-aero-came-my-car-899698/ (Pic Thread)
Note that the front and rear end pieces are THREE PIECES. Do not confuse with the Erebuni or Kaminari body kits which are ONE PIECE. It is also molded of ABS plastic just like the front and rear factory bumper covers. Most other aftermarket kits are molded from fiberglass.
1.) Front Fascia/Valence
2.) Left Front Fender Trim
3.) Right Front Fender Trim
4.) Left Side Skirt
5.) Right Side Skirt
6.) Left Rear Panel Trim
7.) Right Rear Panel Trim
8.) Rear Bumper Finisher
S/R) Spoiler/Roof Band - Consists of multiple parts (I've heard up to three pieces each, total six. More info needed; I don't have this part of the kit.)
From the parts I DO have there are part numbers stamped into the plastic.
OE Mazda Part Numbers:
1.) 0000-86-2186 CC / FB01 V4 901
2.) 0000-86-2186 LL / FB01 V4 903
3.) 0000-86-2186 RR / FB01 V4 902
4.) 0000-86-2086 LL / FB01 V4 913
5.) 0000-86-2086 RR / FB01 V4 911
6.) 0000-86-2786 LL / FB01 V4 933
7.) 0000-86-2786 RR / FB01 V4 932
8.) 0000-86-2786 CC / FB01 V4 931
Interestingly enough, it's stamped Made in USA... It's off of a Red 1986 model. 1987 and other color part numbers may vary.
Last edited by Pele; 10-07-10 at 05:16 PM.
10-07-10, 10:33 AM
#2
Right near Malloy
Thread Starter
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,825
Received 499 Likes
on
338 Posts
Placeholder for when I get around to taking it apart and finding part numbers off of it.
Acrylic Power Sunroof Assembly
Mazda Part Number:
PS: DO NOT PM ME ASKING IF IT'S FOR SALE. IT IS NOT.
Acrylic Power Sunroof Assembly
Mazda Part Number:
PS: DO NOT PM ME ASKING IF IT'S FOR SALE. IT IS NOT.
Last edited by Pele; 10-07-10 at 04:20 PM.
10-11-10, 08:02 PM
#3
...must be a conspiracy
Join Date: May 2002
Location: Here, There, Everywhere
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
My 90 Turbo II has the rear mudguards and sunroof wind deflector (smoked clear acrylic). It also came with a 3-piece front end cover (bra) which was quickly removed as soon as I had the title in hand. I'll post pics and part numbers soon.
Trending Topics
11-07-10, 01:59 AM
#8
1988 Mazda RX-7 SE
iTrader: (9)
Join Date: Dec 2006
Location: Beaverton, OR
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
Just got the last Sunroof Deflector in the country supposedly, according to my local Mazda dealer that told me about it when I looked up the part number.
Cost me all of $55 shipped to my door from Diablo Mazda of California.
If you can't indeed read what's in the pics, it was shipped originally to them in 1997, and stayed there until last week.
Cost me all of $55 shipped to my door from Diablo Mazda of California.
If you can't indeed read what's in the pics, it was shipped originally to them in 1997, and stayed there until last week.
11-22-10, 07:22 AM
#11
Right near Malloy
Thread Starter
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,825
Received 499 Likes
on
338 Posts
^
Buddy of mine is looking for a set of Louvers.
I'm looking to complete my current FinishLine kit prior to getting body and paintwork done to my car.
Buddy of mine is looking for a set of Louvers.
I'm looking to complete my current FinishLine kit prior to getting body and paintwork done to my car.
03-03-11, 12:01 AM
#18
Rotary Enthusiast
mine had front and rear finish line bumper halves when i bought it. but the idiot previous owner cut out the front bumper half for a rediculous front mount. awesome! keeping the rear and managed to get sideskirts that look similar to the finish line ones but fibreglass. ill just use front lip for the front coz ill never find another front.
