Odula lip
06-13-05, 04:38 PM
#1
Full Member
Thread Starter
Join Date: Jan 2005
Location: Central Jersey
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Odula lip
Ok i've been considering making my own lip because I can't find the odula lip for my car. But 2day I finally found the chargespeed lip for 255.......pricey as hell! but I wanted to make my own replica of the odula lip to sell it cheaper and all because I know it's a pain to get and it'd help every1 out. My question is, is the chargespeed lip actually the same thing as the odula? In the thread where I found the link to the site for the chargespeed lip they had a pic posted below the link. The black one is on the site advertised as the chargespeed but it's hard to see it because it's black and shiny. The white one looks like an ugly wannabe rip off. I'm hoping that's the feed. (sorry my opinon, the feed is ugly and the odula works with the front better)
Trending Topics
06-13-05, 10:56 PM
#8
the vents are nearly the same but its the center section that is different. The center part on the Odula doesn't go as high as the chargespeed or the FEED. The FEED lip is meant to bolt onto the stock bumper all the way around. The Odula only bolts onto the bumper on the fenders and above the vents.
06-14-05, 01:51 PM
#9
Full Member
Thread Starter
Join Date: Jan 2005
Location: Central Jersey
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Wow, hadn't even noticed that, thanx Jaiyurai. Now my only question is, is there anyone out there who still makes the Odula? Because I like the way the Odula's center is lower than the other two.
09-15-05, 02:12 AM
#10
Rotary Enthusiast
ok sorry to dig the grave with this one but. you have any progress with your fab, gt? i also only have been able to find the charge speed for 255 off http://www.nyxracing.com/....and i def. want the odula lip and then trim the grill. but yeah, please post your progress
