Ok so I am replacing the orings between the LIM and the block there the coolant orings I ordered the part from mazda and when it came in the orings were to big when i ordered them i looked at the parts diagram and showed the guy why are they too big?

 

Really? There's o-rings for the LIM to block? I had a metal gasket and that's all I used. Coolant orings? You mean inside the keg, the combustion orings? How big were the orings you received?

 

Only TIIs have said o-rings. They seal the passage that feeds coolant to the turbo. N/As have no such o-rings.

 

does any one know what size they should be and if mazda changed them so there bigger now?

 

How much too big are they? They should be about the size of a **** ring!

 

lol they need to be a cm or so smaller in circumference it all wont fit in its seating

 

they are a tad larger than the hole on the housing but shouldn't be too much larger.

 

there quite a bit larger

 

there is no way they are gonna even come close to fitting

 

what part number did you get?

8527-13-113 i think is the right one, they are slightly larger than the hole