Nose piece
#1
Who are you?
Thread Starter
Join Date: Mar 2003
Location: CenCal
Posts: 2,235
Likes: 0
Received 0 Likes
on
0 Posts
Nose piece
Does anyone have a better diagram on how to remove the nose on my 7. Im in the process of putting my BMagic kit on and the haynes manual doesnt really show much on removal of the bumper cover. Thanx in advance
chris
chris
#2
I "lost" my emissions....
theres like 6 bolts on top under hood and like 6 on bottom, then 3 inside each fenderwell. remove the well covers and use a long socket wrench on em and the bumper just pulles off. its pretty easy. jack it up tho, its easyier to get to the bolts that way
#4
Rotary Enthusiast
Join Date: Apr 2002
Location: Jacksonville, Florida
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hijack.....
I was trying to remove the bumper on my 87TII and the only thing left is the fender well bolts. I removed the 3 nuts using a deep socket 10mm, but its still being held on by 3 more bolts/screws. They appear to be 8mm or so and the nut is square and I cant get anything to fit on it. Also, the upper most one isnt visible from the wheel well, only when looking at it from behind the bumper cover. There are no bolt/screw heads on that side, just black plastic covers or something. Anyone know wtf this is. I cant get the nose off without removing them, yet I cant seem to remove them! Iff all else fails, the dremel will remove them.
Thanks guys,
Devon
I was trying to remove the bumper on my 87TII and the only thing left is the fender well bolts. I removed the 3 nuts using a deep socket 10mm, but its still being held on by 3 more bolts/screws. They appear to be 8mm or so and the nut is square and I cant get anything to fit on it. Also, the upper most one isnt visible from the wheel well, only when looking at it from behind the bumper cover. There are no bolt/screw heads on that side, just black plastic covers or something. Anyone know wtf this is. I cant get the nose off without removing them, yet I cant seem to remove them! Iff all else fails, the dremel will remove them.
Thanks guys,
Devon
#5
Senior Member
iTrader: (4)
Join Date: May 2006
Location: Pittsburgh
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
How in the Heck do you even get your hands close to there! Do you remove the Lights first? man im having such a hell of time ! i thought that i removed enough bolts and i may have done some damage
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM