Non Power Steering Conversion
#1
Newbie
Thread Starter
Join Date: May 2007
Location: Dallas, TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Non Power Steering Conversion
I just bought an 86 RX7 Base model without power steering. I would like to add power steering. I know I need a power steering pump, bracket, steering rack and hoses. I also believe I need to add the speed sensor computer under the dash. Are there any other required parts I have not mentioned?
Is this a feasable bolt-on conversion? Is the wiring under the hood and under the dash for the speed sensor the same on P/S and non P/S units?
What other models/years can I get these parts from?
Any advise on this conversion would be appreciated!
Is this a feasable bolt-on conversion? Is the wiring under the hood and under the dash for the speed sensor the same on P/S and non P/S units?
What other models/years can I get these parts from?
Any advise on this conversion would be appreciated!
#4
Rotary Enthusiast
iTrader: (1)
Join Date: Aug 2005
Location: Canada
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
IMHO, I dont see the benefit of doing this. Its a whole lot of work and parts.
But if you really want to do it, hey, I'll sell you one. I have everything except one hose ....I think....I even have the AC compressor
But if you really want to do it, hey, I'll sell you one. I have everything except one hose ....I think....I even have the AC compressor
Thread
Thread Starter
Forum
Replies
Last Post