No spark from coil
11-17-08, 07:18 PM
#1
\\TRASHTALK//
Thread Starter
No spark from coil
S4 Turbo engine. Had no power to the leading coil, so i wired in 12v off the fuse box. now there is power to it but it is not sparking.
The car is a S4 T2 that ran great recently with a NA. I relocated the battery and re-loomed the power harness, besides that, and new engine, and gutting the car those are the only new things that were done
The car is a S4 T2 that ran great recently with a NA. I relocated the battery and re-loomed the power harness, besides that, and new engine, and gutting the car those are the only new things that were done
Last edited by Zenki FC3S; 11-17-08 at 07:21 PM.
11-18-08, 08:41 AM
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
The ECU triggers spark. The ECU gets ITS power from the same place the lead coil gets it's power. From the Main Relay via the EGI fuses.
And no, I did NOT suggest you have a bad Main Relay and to change it out. I suggest you need to investigate if the Main Relay is getting power TO it and if the Main Relay is pulling in when the key is put to on.
And no, I did NOT suggest you have a bad Main Relay and to change it out. I suggest you need to investigate if the Main Relay is getting power TO it and if the Main Relay is pulling in when the key is put to on.
Last edited by HAILERS; 11-18-08 at 08:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM
