No power at ECU
Thread Starter
Newbie
Joined: Sep 2002
Posts: 3
Likes: 0
From: Kingston, Ontario
No power at ECU
Hi Folks
I'm trying to get my new project started. I bought it as a non-runner with the ECU supposedly dead.
I've found that there is no power at 3J on the ECU. This power should come through one of the main 60A fuses to the secondary fusebox and through a 7.5A fuse. Then out on a blue/red wire to a connector (X16) coming out as a white/blue to the ECU.
My questions are, which fuse is the 7.5A? It's not really labelled. Also, where is connector X16 ?
TIA
I'm trying to get my new project started. I bought it as a non-runner with the ECU supposedly dead.
I've found that there is no power at 3J on the ECU. This power should come through one of the main 60A fuses to the secondary fusebox and through a 7.5A fuse. Then out on a blue/red wire to a connector (X16) coming out as a white/blue to the ECU.
My questions are, which fuse is the 7.5A? It's not really labelled. Also, where is connector X16 ?
TIA
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Thats the room fuse in the drivers kick panel fuse box. It won't prevent the car from running though. It is simply a memory line for the CPU.
X-16 is the connector between the front harness and the emissons harness and is found in the passengers kick panel. It is a 13 pin plug there.
X-16 is the connector between the front harness and the emissons harness and is found in the passengers kick panel. It is a 13 pin plug there.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM