2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

no park lights..

Thread Tools
 
Search this Thread
 
Old 11-26-03, 05:04 PM
  #1  
Full Member

Thread Starter
iTrader: (12)
 
Join Date: Nov 2003
Location: Simi Valley, CA.
Posts: 187
Likes: 0
Received 1 Like on 1 Post
no park lights..

I did a search and couldn't come up with anything.. here is my problem. i lost the park lights in back. The break lights still work but the parks don't, I checked the fuses and bulbs it all looks fine.. any ideas? dash lights went to.. I am down to head lights and breaks, and turn signels..


Thanks Brian.
Old 11-26-03, 05:43 PM
  #2  
Eet fase

iTrader: (49)
 
AcidShock's Avatar
 
Join Date: May 2002
Location: Lexington, SC USA
Posts: 1,759
Likes: 0
Received 0 Likes on 0 Posts
I believe the CPU controls those lights, dash lights, as well as the idiot lights to name a few things. You should check the CPU for bad solder joints, fried resistors, charred board, et cetera.
Old 11-26-03, 06:33 PM
  #3  
Sick & Twisted

 
dvls-7's Avatar
 
Join Date: Dec 2001
Location: FT Lauderdale, Fl
Posts: 1,993
Likes: 0
Received 0 Likes on 0 Posts
Doubt its the cpu.....its a common problem....the connector that plugs into the switch if you look at it you should see couple of the pins might be corroded or burnt. The connector is located in the cluster surround assembly on the lower left side....if my memory is correct. Good luck with it.
Old 11-27-03, 05:38 AM
  #4  
Full Member

Thread Starter
iTrader: (12)
 
Join Date: Nov 2003
Location: Simi Valley, CA.
Posts: 187
Likes: 0
Received 1 Like on 1 Post
ok cool i ll take a look at the connection..
Old 11-27-03, 11:19 AM
  #5  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Re: no park lights..

Originally posted by TargaRX
I did a search and couldn't come up with anything.. here is my problem. i lost the park lights in back. The break lights still work but the parks don't, I checked the fuses and bulbs it all looks fine.. any ideas? dash lights went to.. I am down to head lights and breaks, and turn signels..


Thanks Brian.
Please read the FAQ for FC at the top of this section before posting. Your question is covered in there.

The problem is a burnt headlight switch and harness, you will need to replace them.
Old 11-27-03, 11:21 AM
  #6  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by AcidShock
I believe the CPU controls those lights, dash lights, as well as the idiot lights to name a few things. You should check the CPU for bad solder joints, fried resistors, charred board, et cetera.
That would be incorrect. The CPU does not control any lights but the Key hole lights, brake lights, turn signals and warning lights (all of which he said were working fine).

It does not control the headlights, parking lights.

Please do not post if you do not know the correct answer.
Old 11-27-03, 12:11 PM
  #7  
Eet fase

iTrader: (49)
 
AcidShock's Avatar
 
Join Date: May 2002
Location: Lexington, SC USA
Posts: 1,759
Likes: 0
Received 0 Likes on 0 Posts
Please do not post if you do not know the correct answer.
Well, happy turkey day to you too!

Sometimes the intolerance on this forum amazes me. It is not like I am post *****, I have what 170 some posts. I was trying to help the guy, that is what this forum is for, I thought.
Old 11-27-03, 01:28 PM
  #8  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by AcidShock
Well, happy turkey day to you too!

Sometimes the intolerance on this forum amazes me. It is not like I am post *****, I have what 170 some posts. I was trying to help the guy, that is what this forum is for, I thought.
No, there are too many people posting simply made up answers like that.

You are not trying to help if the guy goes and wastes his time resoldering the CPU or money (if he buys a CPU) and it in not even closely related to the problem. That is not "trying to help the guy" at all.

And you are right, the other mods and myself have absolutely no tolerance for answers that are clearly wrong when the correct answer could be found so easily.
Old 11-27-03, 01:54 PM
  #9  
Banned. I got OWNED!!!
 
Madrx7racer's Avatar
 
Join Date: Nov 2002
Location: San Jose, CA
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
same exact thing happened to me.... I accidentally put the lights fuse in the ABS slot in my old GTU even though it didnt have ABS. Check the fuses in the engine bay again just to make sure they are in the right place.
Hassell
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zyph3r
Canadian Forum
10
09-16-18 07:14 PM
He's On Toroids
NE RX-7 Forum
48
10-19-15 08:58 PM
dexter snoek
New Member RX-7 Technical
4
09-29-15 09:18 AM
Duc852
Introduce yourself
1
09-22-15 03:49 AM



Quick Reply: no park lights..



All times are GMT -5. The time now is 12:06 PM.