after searching for a while, i came up with 2 answers on the board.

1. bad CPU

2. FSM


well for 1 i pulled the CPU from a known working car that i double checked the turn signals, high beams and side markers worked on. for 2 i came up to this post click here!!

but im sorta lost on this because my multimeter decided to crap out on me. i just put my interior back in (dash and all) and everything works but this and the drivers window wont roll down. im not worried about that yet though. i triple checked all plugs going to and from the dash to make sure they are all plugged in and they are.

**edit** fuses are fine BTW

 

double check the connections to the switches. I had a similar problem with my restoration. Turns out the switches just needed to be cleaned a little bit/reinstalled.

 

thanks, but i forgot to mention that i pulled the headlight/turn signals switch from the working car also. ill clean them and check it out because that car sat for a year. but i took jumper cables to the battery post to make sure they worked.

 

ok, i guess i got the side markers to at least work. it does help if the bulbs are good!!