2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

No gas, revs bouncin' all over the place, check engine light...OMG!!!

Thread Tools
 
Search this Thread
 
Old 01-27-08, 05:58 PM
  #1  
Junior Member
Thread Starter
 
Dav9's Avatar
 
Join Date: Jan 2008
Location: San Francisco
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
No gas, revs bouncin' all over the place, check engine light...OMG!!!

A friend told me about this place and from what I've seen, it's pretty sick.

So I was driving my rx7 earlier today and when I was coming back home, I put it in 2nd and go up this not so steep hill. I'm on the gas a little and about half way up, the throttle just doesn't respond. The car is still on but when I give it some gas, it doesn't accelerate.

I had enough momentum to reach the top and when I do, I put it in neutral and coast down to park. While I'm coasting, the revs start going up to around 2,000 then down to around 1,000. It did that about three times then I pressed on the gas and it stopped doing that.

Then when I find a parking spot and stay idle in it, the rpm's are at around 500, well below 750. I was all wtf is going on at this point. So I give it a little more gas and guess what? The revs start bouncing again. From like, 700 to 1500. And this time, every time the revs went down to 700 the check engine light came on for a split second.

I gave it a little gas again, it stopped bouncing, the idle revs were still below 750, somewhere around 500, and I turned the car off.

Would this be a compression problem? I always had the feeling that my compression might be a little low, but wasn't sure. I don't know if that's the problem right now though. I had just finished practicing how to heel and toe downshift and everything was fine. Whenever I blipped the throttle the rpm's shot up quick. So I really have no idea what's happening under that hood.
Old 01-27-08, 06:25 PM
  #2  
version 2.0

iTrader: (17)
 
texFCturboII's Avatar
 
Join Date: Mar 2007
Location: Fort Worth, TX
Posts: 3,590
Received 1 Like on 1 Post
Check the throttle cable? Find out what Check Engine Light (CEL) code was thrown, go to fc3spro.com to ge that info... super easy! Check your TPS....... hmmmmm.......shootin in the dark, good luck!
Old 01-27-08, 07:18 PM
  #3  
Junior Member
Thread Starter
 
Dav9's Avatar
 
Join Date: Jan 2008
Location: San Francisco
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the advice. That site is really helpful.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
Rotospectre
New Member RX-7 Technical
3
03-28-18 03:33 PM
PhillyFC
General Rotary Tech Support
9
08-21-15 06:36 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM



Quick Reply: No gas, revs bouncin' all over the place, check engine light...OMG!!!



All times are GMT -5. The time now is 03:31 PM.