midnightrx7

iTrader: (4)

Good Morning,

Last night it was wet out so I decided go in the parking lot and do 360s. Not a good idea. I have a 1990 Turboll with a 13B-REW street ported with a Precision 6266. I just made 417rwhp on Thursday 1/10/2013. I was in 1st gear the whole time until I decided to try 2nd gear. I missed the gear and I think I grinded 2nd gear. After that the car will not go back in 1st gear. All the other gears work but it is a little tight coming out of 2nd. With the car on or off it will not go into
1st gear. All fluids are good. Any idea what I broke?

Thanks,

Shaun

REAmemiya_fan

With that power just live without first lol

midnightrx7

iTrader: (4)

It is only at 12 psi.. It's A LOT of fun.. but I want 1st gear back for regular driving around town.

SirCygnus

iTrader: (1)

get a new transmission.

REAmemiya_fan

Blow your life savings on an HKS 6-speed

midnightrx7

iTrader: (4)

Very odd but I drove the car for about 15 minutes and it went back into first gear. Hopefully everything is okay now. Thanks guys.

NCross

iTrader: (18)

Get a new transmission. You probably smashed up a syncro. 2nd gear syncros go bad quite often on Mazda transmissions. But, with 417 WHP you should be able to start off in 3rd!

MrGoodnight

iTrader: (1)

Change the fluid, might help until you can source a new transmission

midnightrx7

iTrader: (4)

I'm going to change the fluid but its going into 1st gear now. I don't know how it fixed it self, which is getting me worried. It drives like nothing happened. Any ideas Why it would just start working again?