I took on this job from a guy who cut his entire wiring harness. I have completed 90% of it, eliminating the emissions. Their are 2 wires that are greeen with a black strip. One in coming from the coolant temp sensor and the other is coming from the varible resistor. My question is which one goes where? I feel like an idiot because I have looked at the fsm and cant figure it out. Also, there are two black wires that I believe to be grounds and have alot of other grounds connected to them throughout the harness. Would it matter either way if I just picked the remaining wires left to be connected? Maybe a pinout would be nice, but I'm challenged in the art of searching for these. Thanks.