anybody have any links offhand where I can get a diagram of all the wiring?

the colors dont match up with this cd player I just bought and I'm trying to install, and I dont really want to guess

thanks in advance, I'm still searching google but though I'd try here too

 

Wiring diagrams are in the factory service manuals, as well as the Haynes manuals.

If you are trying to install an aftermarket stereo, the colours will not match the factory harness. The best bet is to buy a harness adapter so you don't have to cut the factory harness. But if it has already been cut, then check with the wiring diagrams. Also, I suggest running NEW speaker wire. The stock wire is very thin and may connect to stock amps depending on the model.

 

alright man here ya go....

What are the wire colors for adding aftermarket radio
LTBlue/Red= 12v+
LtBlue/White= +Accessory
LtBlue/Yellow= -power ant trigger
Red/Black=+ Lumination
White=Factory Amp Turn on

Ground to the body, use the 10mm bolt behind the center console front drivers access panel.
Do not use the Red/Black as ground it will damage the interior light circuit and dimmer in the car

Front Speakers (maximum of a 15 watt peak from the radio):
LtGreen/Red= Left
LtGreen/Black= Left

LtGreen= Right
LtGreen/Yellow=Right

Rear Speakers
Brown= Left rear
Brown/White= Left Rear

LtBlue= Right Rear
LtBlue/Orange=Right Rear

 

thanks

decided to cut the harness out and just try doing the wiring at my desk, lets see if I can do it O_O

 

^ dude that was right out of the FAQ

 

Now you've made it hard to swap in another stereo in the future. Or if you sell the car, you're going to have one pissed new owner.

Don't hack it. Do it right.

And yes, that info above was copied directly from the FAQ. Good lesson, eh?