New solution for FD UIM to FC adapter
#53
Lacks Ample Funds
iTrader: (1)
The overlap is not the issue. The issue is that the port in the upper would have about 1mm of gasket material or less on the primary runners. The pics I took show the green sharpie all the way to the edge of the inboard part of the runner. No amount of gasket overlap is going to fix that. The upper either needs to be filled in that small "U" section between the primary runners, or I get a billet adapter.
#54
Red Pill Dealer
iTrader: (10)
You're just not getting it for $150. This thing is easy peasy but to be worth my time? $250. Plain aluminum no anodize. You guys do the ground work. I know what even cheap aluminum tooling plate costs, CNC time, etc. $150 is just too cheap.
#56
FC guy
iTrader: (8)
The overlap is not the issue. The issue is that the port in the upper would have about 1mm of gasket material or less on the primary runners. The pics I took show the green sharpie all the way to the edge of the inboard part of the runner. No amount of gasket overlap is going to fix that. The upper either needs to be filled in that small "U" section between the primary runners, or I get a billet adapter.
#57
Lacks Ample Funds
iTrader: (1)
That is the plan for now. I know it's nothing to a person that has a TIG welder and a milling maching to true the gasket face, but I have neither of those things. I am so far off from that point in getting it done that I will wait until I find a reputable welder to get it done.
#58
Red Pill Dealer
iTrader: (10)
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM