2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need a little help..

Thread Tools
 
Search this Thread
 
Old May 20, 2004 | 01:39 PM
  #1  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
need a little help..

hey i just got a 1989 GTU for 1500 with 140,000 miles on it. the car drives fine but when it idles it bounces a lot, especially right when i start it. once it warms up it gets a little more steady..but i dont know whats wrong with it. any help would be appreciated...im new to the forum and to rx7s. thanks
Reply
Old May 20, 2004 | 01:57 PM
  #2  
alwayssideways's Avatar
Nurse I need 1300cc's NOW
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 1,261
Likes: 1
From: Hartford
if it revs up to 3000 and then drops down slowy ,, thats a typical rx7. accelerated warm up process.. if its all over the place. then it could be a leaky injector. or something along those lines
Reply
Old May 20, 2004 | 02:10 PM
  #3  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
ok thanks a lot.....what else could it be? i wanna just replace or fix everything that could cause this
Reply
Old May 20, 2004 | 02:21 PM
  #4  
WonkoTheSane's Avatar
Green Flameless
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2002
Posts: 2,242
Likes: 0
From: North Central PA
Word on the street is that Grounding can cause stuff like that, check all the engine grounds and such, or maybe even add your own to chassis. See if that helps, I know more grounding never hurts, anyway
Reply
Old May 20, 2004 | 03:52 PM
  #5  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
thanks...anymore help would be greatly appreciated
Reply
Old May 20, 2004 | 03:56 PM
  #6  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
90% of the time, idle problems are caused by vacuum leaks and/or a bad or misadjusted TPS.
Reply
Old May 20, 2004 | 04:00 PM
  #7  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
how can i find out what the problem is?

Last edited by MDD0101; May 20, 2004 at 04:04 PM.
Reply
Old May 20, 2004 | 04:05 PM
  #8  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
nevermind..i looked in the faq.

but now how would i go about figuring out which one of these problems im dealing with?
Reply
Old May 20, 2004 | 04:07 PM
  #9  
WonkoTheSane's Avatar
Green Flameless
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2002
Posts: 2,242
Likes: 0
From: North Central PA
^^^^
Aaron Cake is one of those you listen to here If he says something, There's a good place to start
Reply
Old May 20, 2004 | 04:09 PM
  #10  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
the whole engine compression thing is kinda scaring me tho..im hoping its not that.
Reply
Old May 20, 2004 | 06:52 PM
  #11  
FC-chan's Avatar
Two drops of Superglue
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 221
Likes: 0
From: Fort Collins, CO
fix the grounds and adjust tps first, they're easy. fixing grounds did lots for my car.
Reply
Old May 20, 2004 | 07:58 PM
  #12  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
how do u fix the grounds? and where is the TPS?
Reply
Old May 20, 2004 | 08:23 PM
  #13  
alwayssideways's Avatar
Nurse I need 1300cc's NOW
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 1,261
Likes: 1
From: Hartford
take some sand paper ,, take off one ground. scuff the mounting surface and the terminal.. bolt the ground back on and move onto the next one .. thet reminds me thats something i should do to
Reply
Old May 20, 2004 | 09:00 PM
  #14  
MDD0101's Avatar
Thread Starter
slowmotion
Tenured Member 15 Years
 
Joined: May 2004
Posts: 955
Likes: 0
From: Hamden, Ct
wow..i just searched grounding and the results that ppl got impressed me...im gonna do that tomorrow.
Reply
Old May 22, 2004 | 12:05 PM
  #15  
FC-chan's Avatar
Two drops of Superglue
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 221
Likes: 0
From: Fort Collins, CO
and for the tps search "tps adjustment" and use aaroncake's directions.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FDeez
3rd Generation Specific (1993-2002)
4
Jan 25, 2003 06:36 PM
veilside123
3rd Generation Specific (1993-2002)
1
Oct 20, 2002 01:37 PM
TheAnalogKiddd
2nd Generation Specific (1986-1992)
15
Oct 1, 2002 12:10 AM
Rx-Revin
3rd Generation Specific (1993-2002)
3
Mar 30, 2002 07:40 PM




All times are GMT -5. The time now is 08:49 PM.