2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

need help wont start

Thread Tools
 
Search this Thread
 
Old 02-26-04, 08:35 PM
  #1  
Full Member

Thread Starter
 
burntclutch's Avatar
 
Join Date: Jan 2004
Location: gilbert, az
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
need help wont start

2A+RON and I replaced the fuel hoses and took out the rats nest and replaced all the necessary vacuum lines, and plugged up the other ones. we took the car out for a spin and realized the secondaries solenoid wasnt plugged in. so we plugged it in and the car wouldnt start. we did a flood check and still nothing. We took the fuel line off and the secondaries sprayed out some fuel, then we put them back in and the car still wont start. did some more flood checking. and nothing. now it will when i crank it, it will turn over go to a grand then die immediately no matter if i pump the gas or not. it exhibits of a giant vaccum leak.

any ideas?
Old 02-26-04, 08:40 PM
  #2  
Full Member

Thread Starter
 
burntclutch's Avatar
 
Join Date: Jan 2004
Location: gilbert, az
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
its an S4 N/A with a street port if that helps
Old 02-26-04, 08:41 PM
  #3  
Rotary Freak

 
2a+RoN's Avatar
 
Join Date: Dec 2001
Location: chandler, AZ
Posts: 2,402
Likes: 0
Received 0 Likes on 0 Posts
it was one of the sec. injectors, not solenoid that was unplugged. I checked the AFM and its plugged in, can't think of any intake leaks that would cause this. I know its just gotta be something stupid that I am forgetting.
Old 02-26-04, 08:42 PM
  #4  
Rotary Freak

 
2a+RoN's Avatar
 
Join Date: Dec 2001
Location: chandler, AZ
Posts: 2,402
Likes: 0
Received 0 Likes on 0 Posts
I am thinking we should check the fuel pressure chris, and probably the voltage the fuel pump is putting out.
Old 02-26-04, 11:51 PM
  #5  
Full Member

Thread Starter
 
burntclutch's Avatar
 
Join Date: Jan 2004
Location: gilbert, az
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
bump
Old 02-27-04, 10:42 PM
  #6  
Full Member

Thread Starter
 
burntclutch's Avatar
 
Join Date: Jan 2004
Location: gilbert, az
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
^^^^
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: need help wont start



All times are GMT -5. The time now is 06:54 PM.