Need help No spark new rebuilt engine
#1
Need help No spark new rebuilt engine
HI All, I have done my research here in the forum tried to do most of it. and my car still no spark. I checked all the fuse and they are all okay. I think i have a bad ground.
My guages not working. (volt meter etc) can someone please help me. I am also reading the grounding threads. Do you guys think this will help me if i just follow the grounding procedures? I have an 86 N/A
Thanks in advance.
JP
My guages not working. (volt meter etc) can someone please help me. I am also reading the grounding threads. Do you guys think this will help me if i just follow the grounding procedures? I have an 86 N/A
Thanks in advance.
JP
#3
Full Member
Join Date: Dec 2002
Location: Gateway of the North[North Bay]
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
no spark
Check the live[it's supposed to be live anyways] wire going from your ignition switch to the positive terminal on the coil closest to the firewall.I had this very same problem on a 1979 that I tore doen. I got the whole car for $100. -nobody found the problem cause in 5 years so the car sat abandoned in a field until I came along. I was lucky not smart, just lucky.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM