need help getting diff in. (pic)
#4
Former Moderator. RIP Icemark.
looks like you are missing your front diff mount.
It is easier to put the diff in with the mount on the diff and the driver's side of the subframe lowered.
It is easier to put the diff in with the mount on the diff and the driver's side of the subframe lowered.
Last edited by Icemark; 01-04-04 at 09:49 PM.
#7
Former Moderator. RIP Icemark.
Its pretty hard to torque all the bolts from the front mount, to the diff if the front mount is still attached to the subframe (as well as a pain in the *** to try and line up 3 small studs through the holes).
Trending Topics
#9
Former Moderator. RIP Icemark.
yep, those two, and they are mounted into two slots on the subframe (that you won't be able to see the slots until you take the nuts off)
Thread
Thread Starter
Forum
Replies
Last Post