2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

need help

Thread Tools
 
Search this Thread
 
Old 02-15-09, 06:17 PM
  #1  
Junior Member
Thread Starter
 
crazylouis72's Avatar
 
Join Date: Dec 2008
Location: va
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Unhappy need help

i took my 88 fc to the shop to get it running! i knew i needed a fuel pump but never have time to mess with it after my daughter was born. i told them to just put the fuel pump in for me and i would pick it up later, turned out that they had also put a set of plugs in without my knowing it was not even on my bill. left the shop the car was loosing power i took it back home about 1.5miles away. I then started to check the car to see if it was the pump they had just put in it was not! the last thing i looked at was the plugs and started to think they were not the right plugs and they looked new i pulled the leading plug out and found that they had screwed me big time there was a set a autolite single electrode plugs in the car well as it would be my luck the spark plug tip was in to far the apex seal and rotor where hitting it! bye bye engine!!!!!!!!!!!

well heres my question is there any where that can fix a housing for cheaper than a new one? please need some help on this one!
Old 02-15-09, 06:20 PM
  #2  
Listen to King Diamond.

iTrader: (4)
 
need RX7's Avatar
 
Join Date: Dec 2006
Location: Sterling Heights, MI
Posts: 2,832
Received 6 Likes on 6 Posts
Seriously?! **** it, get the shop to buy you a rebuild kit and new housings and rotors.
Old 02-15-09, 06:25 PM
  #3  
Junior Member
Thread Starter
 
crazylouis72's Avatar
 
Join Date: Dec 2008
Location: va
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
there was no record of the putting the plugs in and they refuse to do anything and besides i need my car now i had to borrow what im driving now
Old 02-15-09, 06:27 PM
  #4  
Listen to King Diamond.

iTrader: (4)
 
need RX7's Avatar
 
Join Date: Dec 2006
Location: Sterling Heights, MI
Posts: 2,832
Received 6 Likes on 6 Posts
That sucks... Do you know for sure that the engine is damaged?
Old 02-15-09, 06:31 PM
  #5  
Junior Member
Thread Starter
 
crazylouis72's Avatar
 
Join Date: Dec 2008
Location: va
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
took ex manifold off apex seal in a few more bits than stock no way in hell the housing is still good after 2 seals broke
Old 02-16-09, 01:05 AM
  #6  
Rotard

 
Mr.FC3s's Avatar
 
Join Date: Jan 2007
Location: Elgin IL
Posts: 172
Received 0 Likes on 0 Posts
so they never bothered to check to make sure you were getting the same plugs you needed? go in and ask them this

You changed the plugs right?
Yes we changed the plugs.
ok and you changed them with out me telling you to do it right?
well yeah we went ahead and did the work
Did you check to make sure you put the right plugs in?

take it like that and tell them you want a new engine or your going to the BBB
Old 02-16-09, 01:21 AM
  #7  
speed maniac

iTrader: (2)
 
91 rx7's Avatar
 
Join Date: Jan 2009
Location: houston, texas
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Mr.FC3s
so they never bothered to check to make sure you were getting the same plugs you needed? go in and ask them this

You changed the plugs right?
Yes we changed the plugs.
ok and you changed them with out me telling you to do it right?
well yeah we went ahead and did the work
Did you check to make sure you put the right plugs in?

take it like that and tell them you want a new engine or your going to the BBB
he is right but record the conversation while your doing that without them noticing the phone recording. but i guess that you told them that the plugs missed up your engine which means they will deny it.

figure it out. don't let it go
Old 02-16-09, 02:54 AM
  #8  
Zoom Zoom Baby

iTrader: (1)
 
Zanity's Avatar
 
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes on 0 Posts
it is illegal to do something to your car without your consent.
and obviously if you have the plugs they put in, and they are wrong, that's physical evidence right there.
as for your question...i have no idea.
Old 02-16-09, 03:12 AM
  #9  
Senior Member

iTrader: (1)
 
Blaen99's Avatar
 
Join Date: Sep 2008
Location: WA
Posts: 327
Likes: 0
Received 0 Likes on 0 Posts
Start recording or getting other physical evidence of all communication with them.

Contact an attorney if stuff doesn't go your way right quick - they owe you a new engine. Not a rebuild kit and housings, but a whole new engine.

Don't back down on it. A few mentions of an attorney and a letter from one will quickly change their tune.
Old 02-16-09, 11:03 AM
  #10  
Senior Member

iTrader: (5)
 
killalot13601's Avatar
 
Join Date: Sep 2005
Location: New York
Posts: 295
Likes: 0
Received 1 Like on 1 Post
I was just about to say. Give me there number and you're name and there name. Ill Claim to be a lawyer.

Been there done that.
Old 02-17-09, 09:37 AM
  #11  
Junior Member
Thread Starter
 
crazylouis72's Avatar
 
Join Date: Dec 2008
Location: va
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
ok i got them to admit it and pay for repairs!! yeah!!!!!!!!!!!!!!

now here is my real question is it cheaper to get housings re finished or get new ones? and where do you get them redone?
Old 02-17-09, 10:01 AM
  #12  
Wiring Nightmare

iTrader: (12)
 
ITSWILL's Avatar
 
Join Date: Dec 2007
Location: Ortonville, MI
Posts: 1,709
Likes: 0
Received 1 Like on 1 Post
if they are paying for the repairs, why wouldn't you get new ones?

I honestly don't see this ending well if they are going to rebuild your engine, they didn't even know which plugs to put in the thing, you think they can properly rebuild it?

I would demand a new engine.
Old 02-17-09, 01:50 PM
  #13  
Listen to King Diamond.

iTrader: (4)
 
need RX7's Avatar
 
Join Date: Dec 2006
Location: Sterling Heights, MI
Posts: 2,832
Received 6 Likes on 6 Posts
Originally Posted by crazylouis72
ok i got them to admit it and pay for repairs!! yeah!!!!!!!!!!!!!!

now here is my real question is it cheaper to get housings re finished or get new ones? and where do you get them redone?
99% of the time, the housing and rotor end up getting destroyed when an apex seal breaks. The pieces of the seal get flung around inside the housing and chew everything up, and there's no way to repair them.




All times are GMT -5. The time now is 04:41 AM.