Need diagram of starter solenoid wiring...
Thread Starter
Rotary Enthusiast
Joined: Oct 2006
Posts: 1,319
Likes: 1
From: BC, Canada
Need diagram of starter solenoid wiring...
Hey guys,
Yes i have searched but all the posts were misleading.
Im trying to get rid of that friggen click click problem!!!.
I bought a new starter solenoid.. I took the old one off and replaced it with the new solenoid... i am pretty sure i put everything back right.. However when i try to connect the battery again i get sparks. Im not risking my car, i would rather ask.. and i am sure the sparks at the terminals are normal..
Battery is new, terminals are new, grounds are all redone.. i Think is is the ignition switch.. can anybody help me!?!?!?
If Icemark of Aaron is out there, pls help!
-Ben
Yes i have searched but all the posts were misleading.
Im trying to get rid of that friggen click click problem!!!.
I bought a new starter solenoid.. I took the old one off and replaced it with the new solenoid... i am pretty sure i put everything back right.. However when i try to connect the battery again i get sparks. Im not risking my car, i would rather ask.. and i am sure the sparks at the terminals are normal..
Battery is new, terminals are new, grounds are all redone.. i Think is is the ignition switch.. can anybody help me!?!?!?
If Icemark of Aaron is out there, pls help!
-Ben
Senior Member
Joined: Jun 2007
Posts: 598
Likes: 0
From: Seattle Washington
First of all, why not just replace the WHOLE STARTER, it would be a lot easier, and the motor in the starter gets old and the gear (might) wear as well. I don't understand when you are getting spark, is it when you try to reconnect the battery after the starter is installed. I hope you wherent installing the starter with the battery connected to the car...
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Sparks?..when you connect the Battery?..You sure you got the Terminals Correct?..It is very Easy to Reverse the Polarity..That is why I Mark MY Positive Cable with a Piece of RED TAPE..it Saves Fuses,and Frustration!..and Unless you have Something ON,the "sparking" is NOT Normal..(my car just Scares the **** out of me when I connect the Battery!..the Talking Alarm Blasts: "Thank YOU !"..haha!)
Thread Starter
Rotary Enthusiast
Joined: Oct 2006
Posts: 1,319
Likes: 1
From: BC, Canada
No i did not work on the car with the battery connected.......
No i did not reverse the polarity of the battery wires....
I thought that i had wired the solenoid right, however when i went to plug the battery back in i got a spark....
All i am asking is where does the wire from the starter connect to the solenoid??
I have refered to the FSM, i am suprised to see that no where, or at least not in plain view in the 'STARTER SYSTEM' section can i find any info on what i need.
My starter is fully rebuilt, alt rebuilt, new battery, redone grounds... I am replacing the solenoid to see if the ignition switch is the problem...
-Ben
No i did not reverse the polarity of the battery wires....
I thought that i had wired the solenoid right, however when i went to plug the battery back in i got a spark....
All i am asking is where does the wire from the starter connect to the solenoid??
I have refered to the FSM, i am suprised to see that no where, or at least not in plain view in the 'STARTER SYSTEM' section can i find any info on what i need.
My starter is fully rebuilt, alt rebuilt, new battery, redone grounds... I am replacing the solenoid to see if the ignition switch is the problem...
-Ben
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
Postman09
3rd Generation Specific (1993-2002)
0
Sep 29, 2015 11:23 AM
