i just bought an 87 NA shell. i want to put s4 turbo II motor in it. i was told the only thing that is different is the hood and the ecu. is there anything else that i will need to change out or do to make that work? I have all the parts from the original NA motor and tranny too.

 

injectors clutch water pump oil pump harness exhaust(down pipe) flywheel fuel pump ....

some are just different but will work, some have to be changed. You OBVIOUSLY need to search and research. This has been done SO much, your post is just lazy.

http://www.rotaryresurrection.com/2n...to_turbo2.html

Read that, and search for the next week. Please don't post again till you have.

 

Quoted directly from the FAQ:


Can I swap a Turbo engine/Jspec engine/13BT/etc into my Non Turbo?
Yes, check these links:
https://www.rx7club.com/forum/showth...threadid=26647
http://www.rotaryresurrection.com/ro...conversion.htm


What Turbo kits can I add onto my non turbo RX-7?
There are no longer kits formally made at the time of this post, however there are companies from time to time that do make available non turbo to Turbo Kits. Because most of these companies stop building the kits, or go out of business in short time, it is impossible to keep active links for them.

Most people that turbo a non turbo make their own kits:
Using the stock TII turbo, exhaust manifold with spacer, NA intakes and NA ECU:
http://www.aaroncake.net/rx-7/naturbo.htm
https://www.rx7club.com/forum/showth...threadid=88540

https://www.rx7club.com/forum/showth...threadid=88758
https://www.rx7club.com/forum/showth...hreadid=124232
http://users2.ev1.net/~ccoutts/turbo..._a_project.htm

Using the stock TII turbo, exhaust manifold, intakes, ECU:
http://forum.teamfc3s.org/showthread.php?t=37694

Turbo-NA Forum:
http://www.aaroncake.net/forum/forum...urbocharged+NA