N/A to Turbo?
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: San Jose Ca
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
N/A to Turbo?
I have an 88 N/A and I have the chance to buyan 88 T2 wiring harness, complete engine and ecu for $500. My question is will the will the connectors that come from the dash( my guages and everything) on my N/A connect to the T2 ecu.
#2
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
yes they will
one thing you should know is the n/a and turbo driveline are different. you _could_ use your n/a driveline, i belive you need a different sizez presure plate than on your n/a motor. Also, the n/a driveline is weaker than the T2. the need to swap the complete turbo driveline onto the car is conterversial, if you were asking just me, i would say you would need to, others on this forum might say other wise
if i confused you or anything, the answer to your question was yes, the dash connectors will meat up
one thing you should know is the n/a and turbo driveline are different. you _could_ use your n/a driveline, i belive you need a different sizez presure plate than on your n/a motor. Also, the n/a driveline is weaker than the T2. the need to swap the complete turbo driveline onto the car is conterversial, if you were asking just me, i would say you would need to, others on this forum might say other wise
if i confused you or anything, the answer to your question was yes, the dash connectors will meat up
Thread
Thread Starter
Forum
Replies
Last Post
rxmiles
3rd Generation Specific (1993-2002)
9
08-24-15 02:07 PM