n/a power
#1
Full Member
Thread Starter
Join Date: Oct 2006
Location: Michigan
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
n/a power
What is the most power any one has got or can get out of a n/a 13b. im curious, my friend toled me about a guy who got 350 to the wheels but that seems like alot thanks
#3
Lives on the Forum
iTrader: (7)
I would say that 190 is about the most you should hope for, and thats with a good streetport and a standalone ECU.
As for the guy that said he got 350 from a NA 13b, hes full of crap. It is theoretically possible, but only with a mega high-dollar PP engine that is totally unusable on the street, and its pushing it even for that engine.
As for the guy that said he got 350 from a NA 13b, hes full of crap. It is theoretically possible, but only with a mega high-dollar PP engine that is totally unusable on the street, and its pushing it even for that engine.
#4
ROTARD FOR LIFE!!!
so no one on this forum call a bridgeport reliable at all?
350hp? I was probably done through one of the highest styles of porting... P-porting(search it up) very expensive, very technical(you need to know what your doing) and are generaly used for Track use only... although some have/are doing it for a budget, 10k is the round about for it and you could make 350hp off of a TII with about 1500 in tuning alone...
like the above said, 200hp is about the tops without doing other serious stuff... besides, 200hp is enough to move that FC around quickly
350hp? I was probably done through one of the highest styles of porting... P-porting(search it up) very expensive, very technical(you need to know what your doing) and are generaly used for Track use only... although some have/are doing it for a budget, 10k is the round about for it and you could make 350hp off of a TII with about 1500 in tuning alone...
like the above said, 200hp is about the tops without doing other serious stuff... besides, 200hp is enough to move that FC around quickly
#6
I have a rotary addiction
iTrader: (18)
what does an FC put out stock, maybe 120-130 rwhp? if your engine has good compression it will put out about 80% of your stock crank HP. put a good full exhaust, intake with heatshield, replace all vacuum lines, good spark plugs, oversized spark plug wires, remove secondary throttle plates, and bore out the throttle body you might put out 160 rwhp. install an electric air pump and remove the AC for another 0.5 HP. Then just strip a few unneeded things from the car for some weight reduction and it should be pretty quick. a port job and better fuel management might put it up to 200 rwhp.
Trending Topics
#9
Rotary Freak
Join Date: Dec 2006
Location: New Hampshire
Posts: 1,791
Likes: 0
Received 0 Likes
on
0 Posts
240-250 is doable with a bridge, but it won't be what I consider a "reliable street car."
For S4s, to up the HP you can install the S5 intake mani and could install high comp rotors. Exhaust is a big deal when trying to reach for the highest HP mark.
Thread
Thread Starter
Forum
Replies
Last Post
rxmiles
3rd Generation Specific (1993-2002)
9
08-24-15 02:07 PM