We'll keep it short.

I'll be building a 4port N/A from a S4 13BT block w/ S5 N/A rotating assembly & S3 Dizzy. I'll be tapping and plugging all the unneeded oil/water feed/drains.

With that said, and the fact it's N/A (no need for turbo exhaust gaskets, and I'm sure other things) what gaskets/etc would I need to put it together? I know if I decide to use TII housings, I'll need to tap the aluminum housings, or use a freeze-plug; also, intake gaskets.

Pretty much, what would I need on top of a S4 N/A kit, to rebuild a S4 13BT (minus turbo-related things)

 

The turbo block will have 4 intake ports. The N/A block has 6 and the gasket in the N/A kit will not match the turbo block.

 

LIM and UIM gaskets, should be about it provided you won't be running emissions. ****, just make your own gasket...pre-cut gaskets are for bitches

 

I won't be running emissions...

so, I'll only need the intake gaskets eh? sweet. I already have the manifold gasket... only need th e intake/keg. THX.