Is my rx7 stock?
#1
Junior Member
Thread Starter
Join Date: May 2016
Location: York, Pennsylvania
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Is my rx7 stock?
Edit: this video was not made for the purpose of figuring out if it is stock or not. My boost guage doesn't work, and I don't know much about rotary engines when modified. I have a video of a pull from 2nd at 30mph. Let me know if you think that i stock accelleration
(https://www.youtube.com/watch?v=8AGhUy82RIM&feature=share)
(https://www.youtube.com/watch?v=8AGhUy82RIM&feature=share)
Last edited by pasn0w43; 07-14-16 at 02:32 PM.
#5
I
iTrader: (6)
the stock boost gauge does not work? then u may want to take a look at the boost sensor ont he passenger side shock tower, perhaps the line has come off or something... you should fix that before beating on it....
I see you have a few other older threads... did u put a new engine in your car? or did the old knocking noise thing go away?
I don't think it seems stock to me
engine bay pics would be a good idea
and what kind of exhaust and intake u have.
I see you have a few other older threads... did u put a new engine in your car? or did the old knocking noise thing go away?
I don't think it seems stock to me
engine bay pics would be a good idea
and what kind of exhaust and intake u have.
Last edited by KompressorLOgic; 07-13-16 at 10:42 PM.
#6
Junior Member
Thread Starter
Join Date: May 2016
Location: York, Pennsylvania
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
the stock boost gauge does not work? then u may want to take a look at the boost sensor ont he passenger side shock tower, perhaps the line has come off or something... you should fix that before beating on it....
I see you have a few other older threads... did u put a new engine in your car? or did the old knocking noise thing go away?
I don't think it seems stock to me
engine bay pics would be a good idea
and what kind of exhaust and intake u have.
I see you have a few other older threads... did u put a new engine in your car? or did the old knocking noise thing go away?
I don't think it seems stock to me
engine bay pics would be a good idea
and what kind of exhaust and intake u have.
Trending Topics
#10
Junior Member
Thread Starter
Join Date: May 2016
Location: York, Pennsylvania
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
This video was made before it started making a knocking noise, plus the apex seals were bad already, so now i'm rebuilding. Or trying.... But it is all I have to figure it out before I get it apart.
#11
Junior Member
Thread Starter
Join Date: May 2016
Location: York, Pennsylvania
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#13
Rotary Enthusiast
iTrader: (23)
After, get a working boost gauge. If you use a fuel cut defender I don't think boost gauge will be accurate. I think the same goes for a rtek ecu. Also get a wideband. Always nice to know your wastegate is functioning properly and you're not leaning out, and keep fuel cut from happening
#14
I
iTrader: (6)
After, get a working boost gauge. If you use a fuel cut defender I don't think boost gauge will be accurate. I think the same goes for a rtek ecu. Also get a wideband. Always nice to know your wastegate is functioning properly and you're not leaning out, and keep fuel cut from happening
yeah the oem gauge a FCD clamps the voltage reading off the boost sensor so the guage doenst read true past that level, bur the stock gauge doenst read very high anyway maybe like 7-8 psi? cant rmemeber the conversion for units....
Thread
Thread Starter
Forum
Replies
Last Post