My pix with the 3rd gen rims
12-27-01, 08:53 PM
#26
Freedoms worth a buck o'5
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
Yeah that is true about the handling, alot of the tuner wheels that fit the FC are front wheel drive offset, and they sit a little to far out, and causes wierd handling quirks with wider tires, and I suppose the FD wheels are the same when fitted with a spacer..
I put 16x7.5 asa's on my GX(se) n/a and the handling improved, yet worsenedd at the same time, its a cornering demon now, but it tracks weired on grooved or uneven road surfaces.. I added a strut tower brace and it cleaned it up quite a bit, I think some better springs and struts may help as well, but proper offset from the beginning would have cost less money...Max
I put 16x7.5 asa's on my GX(se) n/a and the handling improved, yet worsenedd at the same time, its a cornering demon now, but it tracks weired on grooved or uneven road surfaces.. I added a strut tower brace and it cleaned it up quite a bit, I think some better springs and struts may help as well, but proper offset from the beginning would have cost less money...Max
12-27-01, 08:59 PM
#27
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
the tracking and groving just comes from bigger rims and stiffer tires. upgrade once more to 17's and it'll get worse.
the fd rims with spacers would be no different then rims with the correct offset....
the fd rims with spacers would be no different then rims with the correct offset....
12-28-01, 10:42 AM
#30
knowledge junkie
not my car but I'd imaging they sell them somewhere in Japan. I bet aerodyne could find you one if you asked them. You might want to include a link to that picture in your email to help them out.
Aerodyne Industries
714-539-5400
info@aerodyne.net
-- vaughnc
Aerodyne Industries
714-539-5400
info@aerodyne.net
-- vaughnc
12-28-01, 11:26 AM
#31
Best of both worlds
Join Date: Feb 2001
Location: NJ
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by vaughnc
not my car but I'd imaging they sell them somewhere in Japan. I bet aerodyne could find you one if you asked them. You might want to include a link to that picture in your email to help them out.
Aerodyne Industries
714-539-5400
info@aerodyne.net
-- vaughnc
not my car but I'd imaging they sell them somewhere in Japan. I bet aerodyne could find you one if you asked them. You might want to include a link to that picture in your email to help them out.
Aerodyne Industries
714-539-5400
info@aerodyne.net
-- vaughnc
12-29-01, 05:00 PM
#33
Post count is over rated
Thread Starter
aye yo JAMIE, hit me up at condolence187@aol.com ight yo.
i'm selling the third gens though need $$
anyone interested?
i'm selling the third gens though need $$
anyone interested?
12-29-01, 05:23 PM
#35
Post count is over rated
Thread Starter
the back is fine, but thefront u ned to run spacer that u can pick up anywhere either 5/16 or like 22 mm i think, and u have to run 205 ties in the front
12-29-01, 06:54 PM
#37
ummmmmmm
use the H&R 25mm spacers.
all around beucase if you dont use them in back your wheel going to stick way inside. you'll look like a honda drag car.
and you can run 225 in the front.
im running 225/50/16 front but a 225/45/16 would be better.
and 245/45/16 in the rear.
the only reason I had to use 225/50 in the front as it the only 225 size the Yoko A032R's come in, in 16"
with no problems.
you can go here to see how the spacer look
some parts
use the H&R 25mm spacers.
all around beucase if you dont use them in back your wheel going to stick way inside. you'll look like a honda drag car.
and you can run 225 in the front.
im running 225/50/16 front but a 225/45/16 would be better.
and 245/45/16 in the rear.
the only reason I had to use 225/50 in the front as it the only 225 size the Yoko A032R's come in, in 16"
with no problems.
you can go here to see how the spacer look
some parts
Last edited by 87GTR; 12-29-01 at 06:56 PM.
01-22-02, 06:42 PM
#38
Full Member
Join Date: Feb 2001
Location: Trenton, NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
You don't have any problems running 225's up front? I have the 25mm H&R spacers all around with 225 ZR's. I get some serious fender rubbing over some bumps with that size tire. Did u adjust the front camber to avoid rubbing the fender lip?
Matt
Matt
Last edited by vnova94; 01-22-02 at 06:49 PM.
