My Greddy FMIC Install Pics
Everybody seems to put the intercooler there but is the piping in the way of the headlights? I mean people who keep the stock ones. heres were i put mine so i can keep the headlight motors in the same place.
Thread Starter
Bastardized RE AE
Joined: Sep 2001
Posts: 977
Likes: 0
From: Marysville, CALI
^
yeah my lip is fucked up
it's sits like 4" off the ground and before I got used to it being so low I scraped it on everything. I'm going to fix it and paint it after I graduate from Sac State in May, I commute to Sacramento so it would be pointless to paint before then.
houstonderk I had to cut the hell out of the RE kit because the intercooler is so big. I had to take all the lips (mouth, fog light hole, brake ducts) almost flush with the bumper.
I also ditched all the bumper support stuff.
yeah my lip is fucked up
it's sits like 4" off the ground and before I got used to it being so low I scraped it on everything. I'm going to fix it and paint it after I graduate from Sac State in May, I commute to Sacramento so it would be pointless to paint before then.houstonderk I had to cut the hell out of the RE kit because the intercooler is so big. I had to take all the lips (mouth, fog light hole, brake ducts) almost flush with the bumper.
I also ditched all the bumper support stuff.
headlights, a/c, p/s and battery aren't affected by the greddy VSPL kit.
bumper support is - but you can keep it, you just have to trim the bottom rail off of it, weakening it by maybe 50-60%.
bumper support is - but you can keep it, you just have to trim the bottom rail off of it, weakening it by maybe 50-60%.
Thread Starter
Bastardized RE AE
Joined: Sep 2001
Posts: 977
Likes: 0
From: Marysville, CALI
mo
ilike2eatricers I did notice much better response as well. My BOV is also noticeably louder, lol. I just don't reach 14PSI I guess I'll try again once I get the greddy TB elbow in the mail.
BTW here are more pics.
This is with my BOV welded up and my mesh installed to protect my intercooler from rocks and crap.
BTW here are more pics.
This is with my BOV welded up and my mesh installed to protect my intercooler from rocks and crap.
Thread Starter
Bastardized RE AE
Joined: Sep 2001
Posts: 977
Likes: 0
From: Marysville, CALI
pretty much finished
I got my Greddy TB Elbow, looks much better than PVC
I also got a new K&N filter and finally mounted my AFM with angle bracket.
Here's some pics
ed
I also got a new K&N filter and finally mounted my AFM with angle bracket.
Here's some pics
ed
Thread Starter
Bastardized RE AE
Joined: Sep 2001
Posts: 977
Likes: 0
From: Marysville, CALI
I got it from a forum member. It was new he never ended up installing it so I bought it from him.
It's the Greddy V-spec kit. You can get it from rx7store.net, Jason has the best price on it new, $940.
It takes quite a bit of fabrication to get it to fit right on the 87-88 but it is one of the cleanest most complete kits out.
It's the Greddy V-spec kit. You can get it from rx7store.net, Jason has the best price on it new, $940.
It takes quite a bit of fabrication to get it to fit right on the 87-88 but it is one of the cleanest most complete kits out.
Thread
Thread Starter
Forum
Replies
Last Post
