MSD just Messed up my car....
#1
Full Member
Thread Starter
Join Date: Apr 2002
Location: Portland, OR
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
MSD just Messed up my car....
As everybody knows i just bought a MSD ignition 6A. I instsalled it today along with a new set of plugs.When started it and went out it had NO power at all it didetn matter where my foot was on thethrottle... *great I think* so i get home unplug the thing and take off agian SAME thing.. i'm thinking that it might have shorted the plug wires but i havent checked yet *they look like they are orginal*
sooo PLEASE HELP!!!!
sooo PLEASE HELP!!!!
#6
Full Member
Thread Starter
Join Date: Apr 2002
Location: Portland, OR
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
OK i'll do a complete run through now that i remember
something that was very very bad...
ok first i pulled the coil brought in the house opend
up the back plate and soderd 2 leads one on to
incoming cream and one on the incoming black (i hate
cuting the wireing harness for anything) i sealed it
up then put it back into the car after i mounted the
MSD 6A i wired the red to the cream incoming the white
to the black incoming and the orange (i know i placed
them right becuse i double checked it) to the postive
out going and the black to the negitve out going. i
connected it to the batery and then i started it up
(notice i forgot something very importent) i left took
her around the block thats when i noticed the problem.
i brought her back looked in the engine bay and gess
what... i forgot the plug in the coil.... so i unhook
the MSD (wasent hard soderd in) hook up the coil and
i'm still having the problem..
allright there is everything i did it from the FC3Spro
site
something that was very very bad...
ok first i pulled the coil brought in the house opend
up the back plate and soderd 2 leads one on to
incoming cream and one on the incoming black (i hate
cuting the wireing harness for anything) i sealed it
up then put it back into the car after i mounted the
MSD 6A i wired the red to the cream incoming the white
to the black incoming and the orange (i know i placed
them right becuse i double checked it) to the postive
out going and the black to the negitve out going. i
connected it to the batery and then i started it up
(notice i forgot something very importent) i left took
her around the block thats when i noticed the problem.
i brought her back looked in the engine bay and gess
what... i forgot the plug in the coil.... so i unhook
the MSD (wasent hard soderd in) hook up the coil and
i'm still having the problem..
allright there is everything i did it from the FC3Spro
site
#7
No longer cares
Join Date: Apr 2002
Location: just a bit north of your business
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
do you know this to be a good ignition box? they do have a tendancy to be/go bad in many vehicles. I know dodge owners who drive around with spares. (no ****... they're my friends)
Just a thought....
Just a thought....
Trending Topics
#9
Lava Surfer
Join Date: Mar 2002
Location: Kailua, HI
Posts: 2,354
Likes: 0
Received 0 Likes
on
0 Posts
call up msd, their tech support guys know their stuff. i haven't needed help with the rx, but i have with other cars.
check this out too, maybe somethings mis-wired:
http://fc3s-pro.com/TECH/HOWTO/CDI/cdi.html
check this out too, maybe somethings mis-wired:
http://fc3s-pro.com/TECH/HOWTO/CDI/cdi.html
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM