Most cost effective way to delete flapper-door AFM? Street-tunable aftermarket ECU
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2011
Location: Edmonton, AB, Canada
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Most cost effective way to delete flapper-door AFM? Street-tunable aftermarket ECU
As the title states, I'm looking for a cost effective way to eliminate the flapper arm AFM.
I currently have an HKS F-CON piggyback setup with GCC, which I was lead to believe allows for AFM removal (using the included MAP sensor), but I can't get a firm answer on this, and the car isn't ready to fire up/play around with.
What is the cheapest means of removal, with a street-tunable (GReddy TD06 20g, 850cc primaries, 1000cc secondaries, rising rate adjustable FPR, fuel cut defender, innovate MTX-L wideband, GReddy EGT gauge, etc.). This is a budget build, and I am not looking to re-wire the entire car. Just looking for a drop-in plug-n-play solution.
This is not an out-of-this-world turbo setup, nor am I looking for crazy numbers... I just want to make good power, in a simple setup, without having to keep the dated AFM.
Any suggestions? Or any first-hand knowledge on the HKS FCON piggyback allowing for this?
I currently have an HKS F-CON piggyback setup with GCC, which I was lead to believe allows for AFM removal (using the included MAP sensor), but I can't get a firm answer on this, and the car isn't ready to fire up/play around with.
What is the cheapest means of removal, with a street-tunable (GReddy TD06 20g, 850cc primaries, 1000cc secondaries, rising rate adjustable FPR, fuel cut defender, innovate MTX-L wideband, GReddy EGT gauge, etc.). This is a budget build, and I am not looking to re-wire the entire car. Just looking for a drop-in plug-n-play solution.
This is not an out-of-this-world turbo setup, nor am I looking for crazy numbers... I just want to make good power, in a simple setup, without having to keep the dated AFM.
Any suggestions? Or any first-hand knowledge on the HKS FCON piggyback allowing for this?
#2
mattg prob nt coming back
iTrader: (3)
Join Date: Feb 2005
Location: OrangePark FL
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
get a power fc
/thread
jk, i suggest the power fc because its a full stand alone and one that i prefer. to my knowledge the only way to get rid of the AFM is to go stand alone
/thread
jk, i suggest the power fc because its a full stand alone and one that i prefer. to my knowledge the only way to get rid of the AFM is to go stand alone
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM
befarrer
Microtech
3
08-22-15 05:52 PM