MOre Power
#2
Goes *round*round*round*
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
New suspension: KYB AGX and Eibach Springs= $610
Exhaust: Racing Beat header= $225
Hollow your stock cat= FREE
Exhaust shop Custom straight pipe= ~$100
Rice muffler or Flowmaster Muffler= ~$100
___________________________________
Total ~$1035
You can probably save a bit more by looking around but this was a quick estimate.
Try to save enough to get a new K&N filter (cone or box)
BTW, this setup will more than likely be very loud.
Oh yeah, search noob.
Exhaust: Racing Beat header= $225
Hollow your stock cat= FREE
Exhaust shop Custom straight pipe= ~$100
Rice muffler or Flowmaster Muffler= ~$100
___________________________________
Total ~$1035
You can probably save a bit more by looking around but this was a quick estimate.
Try to save enough to get a new K&N filter (cone or box)
BTW, this setup will more than likely be very loud.
Oh yeah, search noob.
#6
Now With 10th AE Fun!
iTrader: (1)
Join Date: Jun 2005
Location: CA
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Racing Beat Header: 225
Cat replacement pipe: 45 (I got mine made for 25)
SAFCII:200
Wideband o2 sensor and readout.: 350
K&N drop in filter: 70 or you could buy a cone filter, prelude intake kit, and fab your own cold air intake.: 150
Total: ~950
And yes Catback means the exhaust from the Catylitic Converter back to the mufflers.
Cat replacement pipe: 45 (I got mine made for 25)
SAFCII:200
Wideband o2 sensor and readout.: 350
K&N drop in filter: 70 or you could buy a cone filter, prelude intake kit, and fab your own cold air intake.: 150
Total: ~950
And yes Catback means the exhaust from the Catylitic Converter back to the mufflers.
Trending Topics
#8
strictly business
iTrader: (8)
Join Date: May 2005
Location: chamber of farts
Posts: 6,187
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DragonRx7
Hollow your stock cat= FREE
#9
Now With 10th AE Fun!
iTrader: (1)
Join Date: Jun 2005
Location: CA
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Well it's just as it sounds. You take your catylitic converter off and there is this weird, highly toxic, honeycomb stuff in it. You take that out and your exhaust flows more freely. But it sounds weird and it isn't that expensive to just have an exhaust shop weld a straight pipe on. There are also 2 other "precats" on your 86'. Getting a header will replace these, and your very constricting stock manifold. If you decide to get a header though, get the header then the straight pipe, because the stock cat length is too short to fit a header without modification.
#10
Goes *round*round*round*
Join Date: Apr 2003
Location: San Antonio
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
True. He could get the straight pipe on but, since I noticed that he's in California I figured just in case for inspection he could have the cat there just to show for it.
#11
Now With 10th AE Fun!
iTrader: (1)
Join Date: Jun 2005
Location: CA
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Yeah but it is only four bolts to swap it back in, just remember to keep your stock cat. If you are gonna straight pipe it, don't hollow out your cat because you will have to buy another to get it registered.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM