miss firing
02-25-03, 02:34 PM
#1
Full Member
Thread Starter
Join Date: Apr 2001
Location: pittsburgh, pa, usa
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
miss firing
i just got done failing my emmision test and i naoticed that when they were do ing the part where they run the engine at 2500 rpm it had a miss firing. it just kept popping. what could this be and how can i correct it?
thanks
Nate
thanks
Nate
02-25-03, 02:42 PM
#2
hmmm well..........
poping is normal at idle but I have never heard of a rotary poping while it was running a 2500rpm constantly. I would suggest cleaning the injectors and redlineing it a couple of times to clean all four injectors
replace fuel filter and check timming
poping is normal at idle but I have never heard of a rotary poping while it was running a 2500rpm constantly. I would suggest cleaning the injectors and redlineing it a couple of times to clean all four injectors
replace fuel filter and check timming
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM